0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Development of a Non-Structural Prefabricated Panel Based on Construction and Demolition Waste for Sustainable Construction

Auteur(s):
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Infrastructures, , n. 8, v. 9
Page(s): 135
DOI: 10.3390/infrastructures9080135
Abstrait:

The study focuses on developing a prefabricated panel for non-structural purposes by optimizing mortar mix designs incorporating recycled microplastic (RMP) and construction demolition waste (CDW) at various ratios (0, 10, 20, 30, and 100%). Experimental procedures encompassed material characterization, mortar specimen manufacturing, compression resistance testing, and thermal/acoustic panel tests following Colombian technical standards. Results indicate that incorporating 20% CDW enhances material strength, with cylinder number 3 (20% of CDW) achieving a resistance of 31.45 MPa. Panels incorporating recyclable waste materials show improved acoustic and thermal insulation properties, with up to 39 dB reduction in sound transmission and a 21 °C decrease in thermal transmission observed (5.6% and 35% for panel and door, respectively). This research advances sustainable construction practices demonstrating the potential of prefabricated panels using recyclable materials, offering eco-friendly solutions with enhanced performance characteristics for construction applications.

Copyright: © 2024 the Authors. Licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10798236
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine