0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Design of Diagonal Cross-Bracings: Part 2 Experimental Study

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Engineering Journal, , n. 4, v. 25
Page(s): 156-160
DOI: 10.62913/engj.v25i4.507
Abstrait:

The theoretical study reported in the first part of the paper (AISC Engineering Journal, 3rd Qtr., 1987, pp. 122-126) showed the transverse stiffness offered by the tension diagonal in cross-bracing systems is sufficient for assuming that, for out-of-plane buckling, the effective length of the compression diagonal is 0.5 times the diagonal length, when the diagonals are continuous and attached at the intersection point. Two series of tests were performed to demonstrate the validity of the theoretical study. Seven transverse stiffness tests were carried out to demonstrate the validity of the equations used to determine the transverse stiffness provided by the tension diagonal. Fifteen buckling tests were carried out to demonstrate the validity of the equation used to determine the effective length factor. Both series of tests are reported in this second part of the paper.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.62913/engj.v25i4.507.
  • Informations
    sur cette fiche
  • Reference-ID
    10783018
  • Publié(e) le:
    17.05.2024
  • Modifié(e) le:
    17.05.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine