Damage monitoring and impact detection using optical fiber vibration sensors
| Auteur(s): |
Y. C. Yang
(Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), San 31, Hyoja-dong, Nam-gu, Pohang, 790-784, Republic of Korea)
K. S. Han |
|---|---|
| Médium: | article de revue |
| Langue(s): | anglais |
| Publié dans: | Smart Materials and Structures, juin 2002, n. 3, v. 11 |
| Page(s): | 337-345 |
| DOI: | 10.1088/0964-1726/11/3/303 |
| Abstrait: | Intensity-based optical fiber vibrations sensors (OFVSs) are used in damage monitoring of fiber-reinforced plastics, in vibration sensing, and location of impacts. OFVSs were constructed by placing two cleaved fiber ends in a capillary tube. This sensor is able to monitor structural vibrations. For vibration sensing, the optical fiber sensor was mounted on the carbon fiber reinforced composite beam, and its response was investigated for free and forced vibration. For locating impact points, four OFVSs were placed at chosen positions and the different arrival times of impact-generated vibration signals were recorded. The impact location can be determined from these time delays. Indentation and tensile tests were performed with the measurement of the optical signal and acoustic emission (AE). The OFVSs accurately detected both free and forced vibration signals. Accurate locations of impact were determined on an acrylate plate. It was found that damage information, comparable in quality to AE data, could be obtained from the OFVS signals. |
- Informations
sur cette fiche - Reference-ID
10215758 - Publié(e) le:
04.12.2018 - Modifié(e) le:
04.12.2018
Structurae coopère avec
