0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Damage identification of thin plate-like structures combining improved singular spectrum analysis and multiscale cross-sample entropy (ISSA-MCSEn)

Auteur(s):
ORCID

ORCID

Médium: article de revue
Langue(s): anglais
Publié dans: Smart Materials and Structures, , n. 3, v. 32
Page(s): 034001
DOI: 10.1088/1361-665x/acb51a
Abstrait:

In this paper, a new method integrating the improved singular spectrum analysis and the multiscale cross-sample entropy Improved Singular Spectrum Analysis and Multiscale Cross-Sample Entropy, (ISSA-MCSEn) is developed to identify the size of early damages in thin plate-like structures. In the algorithm, with the help of improved singular spectrum analysis (ISSA), the principal components relevant to the reference and damage-induced signals are successfully extracted, and then the components related to the damage are reconstructed for damage size detection. Lastly, the multiscale cross-sample entropy (MCSEn) of the reconstructed signal is computed as a new damage index to evaluate the size of the damage. To validate the proposed ISSA-MCSEn algorithm, two different experiments are conducted on aluminum and composite fiber reinforced polymer (CFRP) plates to detect simulated crack and through-hole, respectively. Comparative performance analysis of ISSA and singular spectrum analysis (SSA) demonstrates that the total increment of the normalized MCSEn by using ISSA is 30%–81% while the one by using SSA is only 6.5%–9%, which demonstrates that the performance of the proposed ISSA is much better than SSA. The experimental results also show that the average of the normalized MCSEn of the proposed algorithm increases by over 77% and 28% as the size of the two damages in CFRP and aluminum plates changes from 0 to 8 mm and 0 to 1.2 mm, respectively. Moreover, the relationship between the normalized MCSEn and damages’ size is well linear, and the Pearson’s coefficient of their fitting curves is more than 0.99, which demonstrates that this linear relationship can be employed for damage size detection in both CRFP and aluminum plates. The linear relationship between the damage size and normalized MCSEn is used for damage detection, and the relative error between the actual and detected size is 1.64%–6.92%. In addition, the performance comparison of ISSA-MCSEn and SSA-FuzzyEn shows that the total increment of the ISSA-MCSEn algorithm due to the damage is 30%–81% while the one of SSA-FuzzyEn is only 4%–15%, which indicates that the proposed ISSA-MCSEn is more sensitive to the damage than SSA-FuzzyEn and it is more suitable for detection of small-size damages.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1088/1361-665x/acb51a.
  • Informations
    sur cette fiche
  • Reference-ID
    10707673
  • Publié(e) le:
    21.03.2023
  • Modifié(e) le:
    21.03.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine