0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Cracking Mode Analysis of Crack Initiation in Rocks under Uniaxial Compression

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-9
DOI: 10.1155/2019/5818071
Abstrait:

Crack initiation is related to the behavior of the preexisting microcracks within a rock specimen, which suggests the specimen starts to fail. The determination of crack initiation stress is important for identifying the elastic stage and related mechanical parameters. Uniaxial compression tests with acoustic emission monitoring were performed to study crack initiation for tight sandstone, loose sandstone, and granite. The evolution of the cracking mode, i.e., the statistics of the cracking mode under compression, was obtained through modified acoustic emission parameter analysis. Based on the logarithm of the acoustic emission parameter (LAEP), a cracking mode analysis (CMA) method is proposed and used to determine the crack initiation stress. Results from the tests indicate that the crack initiation stress between the same rock specimens obtained by CMA is very close. The mean ratio of crack initiation stress to compression strength is 0.45, 0.34, and 0.35 for tight sandstone, loose sandstone, and granite, respectively. According to the results of CMA, crack volumetric strain (CVS) method, and lateral strain response (LSR) method, there is no big difference among those methods in tight sandstone and loose sandstone. In granite, the results obtained by CMA are close to those obtained by CVS, but smaller than those obtained by LSR. The CMA interprets the initiation of cracks from the fracture behavior of microcracks and is an objective method to determine the initiation stress.

Copyright: © 2019 Ye Lou et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10296147
  • Publié(e) le:
    27.01.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine