0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Crack-filling effect of gel on time-dependent mechanical behavior of concrete damaged by alkali–silica reaction

Auteur(s):
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Materials and Structures, , n. 3, v. 57
DOI: 10.1617/s11527-024-02308-y
Abstrait:

This study aims to investigate the crack-filling effect of gel generated by the alkali–silica reaction (ASR) on the mechanical behavior of concrete and propose an analytical model to predict the compression behavior of ASR-damaged concrete. To identify the mechanical contribution of the gel-filling cracks, the distribution of the chemical compositions and elastic moduli of the crack-filling gels were observed using SEM–EDS analysis and nano-indentation tests. The experimental results showed that the elastic modulus of the gel with a high-calcium composition ranged from 30 to 40 GPa, which is comparable to the elastic modulus of concrete. In addition, through literature reviews of the time-dependent compression behaviors of ASR-affected concrete, it was hypothesized that crack-filling gels can contribute to the recovery of ASR damage, and that the mechanical contribution of gels depends on the ASR crack patterns and changes with time. Based on these assumptions, the resistance of the gels filling the cracks in the compression, shear, and recontact behaviors of ASR-damaged concrete was reflected in the proposed model, in which the gel resistance increased with time and became larger as the ratio of microcracks to total cracks increased. The proposed model was verified through a comprehensive comparison of analysis and test results of compression behavior of ASR-damaged specimens, and it appeared that the change in mechanical properties of concrete according to the degree of damage (ASR expansion) and time was well simulated by the proposed model.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1617/s11527-024-02308-y.
  • Informations
    sur cette fiche
  • Reference-ID
    10770152
  • Publié(e) le:
    29.04.2024
  • Modifié(e) le:
    29.04.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine