• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Construction of 3D Creep Model of Landslide Slip-Surface Soil and Secondary Development Based on FLAC3D

Auteur(s):



Médium: article de revue
Langue(s): en 
Publié dans: Advances in Civil Engineering, , v. 2020
Page(s): 1-15
DOI: 10.1155/2020/2694651
Abstrait:

Landslide deformations have predictable rheological properties, but, when using finite element analysis, only the elastoplastic constitutive equation of soil is considered. Soil creep properties are not considered, often rendering inaccurate results. In this paper, the three-dimensional state equation of the extended Burgers model is derived based on the creep test results of slip-surface soil and the Mohr–Coulomb elastoplastic model. This paper uses FLAC3D, a finite-element software platform, for secondary development and to verify the accuracy of the model and program. A strength reduction method that considers rheological properties is proposed. A numerical simulation of rheological properties is conducted on a landslide and compared with conventional viscoelastic constitutive results. It can be found that the landslide displacement calculation is significantly smaller when the rheological properties are not considered. The stability coefficient of the landslide calculated by the strength reduction method, considering the rheological properties, is smaller than the coefficient calculated without considering rheological properties.

Copyright: © 2020 Li Wang et al. et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10409463
  • Publié(e) le:
    16.01.2020
  • Modifié(e) le:
    16.01.2020