• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Concrete confinement with TRM versus FRP jackets at elevated temperatures

  1. Bisby LA, Chen JF, Li SQ, Stratford TJ, Cueva N, Crossling K (2011) Strengthening fire-damaged concrete by confinement with fibre-reinforced polymer wraps. Eng Struct 33(12):3381–3391

    https://doi.org/10.1016/j.engstruct.2011.07.002

  2. Chowdhury E, Eedson R, Green M, Bisby L, Benichou N (2011) Mechanical characterization of fibre reinforced polymers materials at high temperature. Fire Tech 47:1063–1080

    https://doi.org/10.1007/s10694-009-0116-6

  3. ACI (2008) 440.2R-08 Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute, Farmington Hills, MI
  4. Chowdhury E, Bisby L, Green M, Kodur V (2007) Investigation of insulated FRP-wrapped reinforced concrete columns in fire. Fire Saf J 42:452–460

    https://doi.org/10.1016/j.firesaf.2006.10.007

  5. Rickard I, Bisby L, Stratford T, Hulsberg S (2013) Effects of heating on FRP confinement of concrete. In: 11th International symposium on fibre reinforced polymers for reinforced concrete structures, Guimarães, Portugal, 26–28 June
  6. Koutas, Lampros N. / Tetta, Zoi / Bournas, Dionysios A. / Triantafillou, Thanasis C. (2019): Strengthening of Concrete Structures with Textile Reinforced Mortars: State-of-the-Art Review. Dans: Journal of Composites for Construction, v. 23, n. 1 (février 2019).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000882

  7. Carloni C, Bournas DA, Carozzi FG, D’Antino T, Fava G, Focacci F, Giacomin G, Mantegazza G, Pellegrino C, Perinelli C, Poggi C (2015) Fiber reinforced composites with cementitious (inorganic) matrix. In: Pellegrino C, Sena-Cruz J (eds) Chapter 9 in: Design procedures for the use of composites in strengthening of reinforced concrete structures—State of the art report of the RILEM TC 234-DUC. RILEM STAR Book Series, vol 501. Springer, Berlin, pp 349–391
  8. Koutas, Lampros N. / Bournas, Dionysios. A. (2017): Flexural Strengthening of Two-Way RC Slabs with Textile-Reinforced Mortar: Experimental Investigation and Design Equations. Dans: Journal of Composites for Construction, v. 21, n. 1 (février 2017).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000713

  9. Papanicolaou, Catherine G. / Triantafillou, Thanasis C. / Papathanasiou, Myrto / Karlos, Kyriakos (2008): Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: out-of-plane cyclic loading. Dans: Materials and Structures, v. 41, n. 1 (janvier 2008).

    https://doi.org/10.1617/s11527-007-9226-0

  10. Raoof SM, Koutas LN, Bournas DA (2016) Bond between textile-reinforced mortar (TRM) and concrete substrates: experimental investigation. Compos B 98:350–361. https://doi.org/10.1016/j.compositesb.2016.05.041

    https://doi.org/10.1016/j.compositesb.2016.05.041

  11. Tetta ZC, Koutas LN, Bournas DA (2015) Textile-reinforced mortar (TRM) versus fibre-reinforced polymers (FRP) in shear strengthening of concrete beams. Compos Part B 77:338–348. https://doi.org/10.1016/j.compositesb.2015.03.055

    https://doi.org/10.1016/j.compositesb.2015.03.055

  12. Tetta ZC, Koutas LN, Bournas DA (2016) Shear strengthening of full-scale RC T-beams using textile-reinforced mortar and textile-based anchors. Compos Part B 2016(95):225–239. https://doi.org/10.1016/j.compositesb.03.076

    https://doi.org/10.1016/j.compositesb.03.076

  13. Triantafillou TC, Papanicolaou CG (2006) Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets. Mater Struct Rilem 39(1):85–93
  14. Triantafillou TC, Papanicolaou CG, Zissimopoulos P, Laourdekis T (2006) Concrete confinement with textile-reinforced mortar jackets. ACI Struct J 103(1):28–37
  15. Bournas DA, Lontou PV, Papanicolaou CG, Triantafillou TC (2007) Textile-reinforced mortar versus fibre-reinforced polymer confinement in reinforced concrete columns. ACI Struct J 104(6):1
  16. Bournas, D. A. / Triantafillou, T. C. / Zygouris, K. / Stavropoulos, F. (2009): Textile-Reinforced Mortar versus FRP Jacketing in Seismic Retrofitting of RC Columns with Continuous or Lap-Spliced Deformed Bars. Dans: Journal of Composites for Construction, v. 13, n. 5 (octobre 2009).

    https://doi.org/10.1061/(asce)cc.1943-5614.0000028

  17. Bournas DA (2018) Concurrent seismic and energy retrofitting of RC and masonry building envelopes using inorganic textile-based composites combined with insulation materials: a new concept. Compos Part B Eng 148:166–179

    https://doi.org/10.1016/j.compositesb.2018.04.002

  18. Gkournelos PD, Bournas DA, Triantafillou TC (2019) Combined seismic and energy upgrading of existing reinforced concrete buildings using TRM jacketing and thermal insulation. Earthq Struct 16:625–639. https://doi.org/10.12989/EAS.2019.16.5.625

    https://doi.org/10.12989/EAS.2019.16.5.625

  19. Pohoryles DA, Maduta C, Bournas DA, Kouris LA (2020) Energy performance of existing residential buildings in Europe: a novel approach combining energy with seismic retrofitting. Energy Build (in press)

    https://doi.org/10.1016/j.enbuild.2020.110024

  20. Triantafillou, Thanasis C. / Karlos, Kyriakos / Kefalou, Kalliopi / Argyropoulou, Eirini (2017): An innovative structural and energy retrofitting system for URM walls using textile reinforced mortars combined with thermal insulation: Mechanical and fire behavior. Dans: Construction and Building Materials, v. 133 (février 2017).

    https://doi.org/10.1016/j.conbuildmat.2016.12.032

  21. Al-Salloum, Yousef A. / Almusallam, Tarek H. / Elsanadedy, Hussein M. / Iqbal, Rizwan A. (2016): Effect of elevated temperature environments on the residual axial capacity of RC columns strengthened with different techniques. Dans: Construction and Building Materials, v. 115 (juillet 2016).

    https://doi.org/10.1016/j.conbuildmat.2016.04.041

  22. Askouni PD, Papanicolaou CCG, Kaffetzakis MI (2019) The effect of elevated temperatures on the TRM-to-masonry bond: comparison of normal weight and lightweight matrices. Appl Sci Basel 9:2156

    https://doi.org/10.3390/app9102156

  23. Donnini J, Corinaldesi V, Nanni A (2016) Mechanical properties of FRCM using carbon fabrics with different coating treatments. Compos Part B Eng 88:220–228. https://doi.org/10.1016/j.compositesb.2015.11.012

    https://doi.org/10.1016/j.compositesb.2015.11.012

  24. Kapsalis P, El Kadi M, De Vervloet J, Munck M, Wastiels J, Triantafillou T, Tysmans T (2019) Thermomechanical behavior of textile reinforced cementitious composites subjected to fire. Appl. Sci. 9:747

    https://doi.org/10.3390/app9040747

  25. Maroudas SR, Papanicolaou CG (2017) Effect of high temperatures on the TRM-to-masonry bond. Key Eng Mater 747:533–554

    https://doi.org/10.4028/www.scientific.net/KEM.747.533

  26. Messori, Massimo / Nobili, Andrea / Signorini, Cesare / Sola, Antonella (2019): Effect of high temperature exposure on epoxy-coated glass textile reinforced mortar (GTRM) composites. Dans: Construction and Building Materials, v. 212 (juillet 2019).

    https://doi.org/10.1016/j.conbuildmat.2019.04.026

  27. Tlaiji T, Vu XH, Ferrier E, SiLarbi A (2018) Thermomechanical behaviour and residual properties of textile reinforced concrete (TRC) subjected to elevated and high temperature loading: experimental and comparative study. Compos Part B Eng 144:99–110. https://doi.org/10.1016/j.compositesb.2018.02.022

    https://doi.org/10.1016/j.compositesb.2018.02.022

  28. Truong GT, Kim J, Choi K-K (2018) Effect of multi-walled carbon nanotubes (MWCNTs) and electroless copper plating on tensile behavior of carbon fiber reinforced polymers. Adv Mater Sci Eng 1:1. https://doi.org/10.1155/2018/8264138

    https://doi.org/10.1155/2018/8264138

  29. Bisby L, Stratford T, Hart C, Farren S (2013) Fire performance of well-anchored TRM, FRCM, and FRP flexural strengthening systems. Advanced Composites in Construction 2013
  30. Tetta ZC, Bournas DA (2016) TRM versus FRP jacketing in shear strengthening of concrete members: behaviour at high temperature. Compos Part B: Eng 106:190–205

    https://doi.org/10.1016/j.compositesb.2016.09.026

  31. Raoof SM, Bournas DA (2017) Bond between TRM versus FRP composites and concrete at high temperatures. Compos Part B Eng 127:150–165. https://doi.org/10.1016/j.compositesb.2017.05.064

    https://doi.org/10.1016/j.compositesb.2017.05.064

  32. Raoof, Saad M. / Bournas, Dionysios A. (2017): TRM versus FRP in flexural strengthening of RC beams: Behaviour at high temperatures. Dans: Construction and Building Materials, v. 154 (novembre 2017).

    https://doi.org/10.1016/j.conbuildmat.2017.07.195

  33. EN 1015-11 (1993) Methods of test for mortar for masonry—Part 11: Determination of flexural and compressive strength of hardened mortar, Brussels: Comité Européen de Normalisation
  34. Saafi M (2002) Effect of fire on FRP reinforced concrete members. Compos Struct 58:11–20

    https://doi.org/10.1016/S0263-8223(02)00045-4

  35. Signorini, Cesare / Nobili, Andrea / Sola, Antonella / Messori, Massimo (2020): Designing epoxy viscosity for optimal mechanical performance of coated Glass Textile Reinforced Mortar (GTRM) composites. Dans: Construction and Building Materials, v. 233 (février 2020).

    https://doi.org/10.1016/j.conbuildmat.2019.117325

  36. White D, Take WA, Bolton M (2003) Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry. Geotechnique 53:619–631

    https://doi.org/10.1680/geot.2003.53.7.619

  37. Tetta ZC, Koutas LN, Bournas DA (2018) Shear strengthening of concrete members with TRM jackets: effect of shear span-to-depth ratio, material and amount of external reinforcement. Compos Part B Eng 137:184–201

    https://doi.org/10.1016/j.compositesb.2017.10.041

  38. CEN (2004) EN 1992-1-2:2004 Eurocode 2: Design of concrete structures—Part 1–2: General rules—Structural fire design. European Committee for Standardisation, Brussels

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10422679
  • Publié(e) le:
    26.05.2020
  • Modifié(e) le:
    26.05.2020