0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Chloride Penetration in Lightweight Aggregate Mortars Incorporating Supplementary Cementing Materials

Auteur(s):


Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2018
Page(s): 1-8
DOI: 10.1155/2018/9759167
Abstrait:

The current research is aiming to investigate the chlorides' penetration resistance of 9 different pumice lightweight aggregate mortars (LWAMs). The composition of the mixture is altered by the addition of metakaolin, fly ash, silica fume, and ground granulated blast furnace slag, substituting 10% and 20% of cement by mass. Workability and compressive strength of the mortars are studied together with durability parameters like water absorption due to capillary absorption and porosity. Moreover, the mortar resistance to chloride penetration is evaluated through non-steady-state chloride migration coefficient, complying to NT BUILD 492 standard. Summarizing all the laboratory test results, while the addition of metakaolin in the range of 20% led to better workability, higher compressive strength, lower sorptivity, and lower volume of open porosity, it did not improve the resistance against chlorides' penetration.

Copyright: © 2018 Maria Stratoura et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10176579
  • Publié(e) le:
    30.11.2018
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine