0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Characterizing Skeleton Structure and Stacking Properties of Continuous and Gap Graded Aggregate Mixtures

Auteur(s):




Médium: article de revue
Langue(s): anglais
Publié dans: Advances in Civil Engineering, , v. 2019
Page(s): 1-14
DOI: 10.1155/2019/4903602
Abstrait:

In order to optimize the skeletal properties of granular pavement materials, a numerical discrete element model for continuous and gap graded aggregate mixtures was developed using a step-by-step filling method. The penetration tests were conducted, and indexes such as penetrating resistance, average coordination number, California bearing ratio, and void ratio of coarse aggregates obtained from the tests were used to evaluate the skeleton structure and the stacking properties of aggregate mixtures. The results show that the skeleton structure of aggregate mixtures is closely related to the combination of particle size. Smaller difference in particle size leads to stronger interference effect. The parameters of stacking properties of continuous and gap graded aggregate mixtures are not significantly different in the natural stacking condition. However, gap graded aggregate mixtures are affected by external loads significantly due to structural reconstruction.

Copyright: © 2019 Dexiang Bao et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10313351
  • Publié(e) le:
    13.05.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine