0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Characterization of Acoustic Emissions from Concrete Based on Energy Activity Coefficient

Auteur(s):





Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 7, v. 14
Page(s): 2109
DOI: 10.3390/buildings14072109
Abstrait:

Single-stage compression loading experiments were carried out on concrete specimens of various strengths to explore the characteristic parameters of the acoustic emission signal and its damage evolution law in the concrete damage process. These specimens were monitored in real time with acoustic emission and DIC instruments during the loading process, and internal pores and slices were scanned with CT scanning instruments after compression. The acoustic emission phenomenon was expressed using the energy activity coefficient, and the law relating to the phenomenon was summarized. The results show that when the peak and mean values in the first adjacent time domain grow rapidly, the specimen produces a large crack and enters the stage of rapid crack development, which can be taken as an indication of the impending damage to the specimen. The energy activity coefficient reflects the damage development intensity as follows: the smaller the energy activity coefficient, the more the cracks developed; the faster the speed, the larger the deformation. With an increase in the load level, the energy activity coefficient gradually tends to stabilize, and the specimen enters the stage of rapid crack development. However, when the energy activity coefficient suddenly increases again, the specimen is destabilized and destroyed. Therefore, the energy activity coefficient responds to the degree of congenital defects in the specimen. As the load increases, the energy activity coefficient is more stable, and the defects are smaller; in contrast, the energy activity coefficient drastically oscillating indicates that the material is very defective.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10795793
  • Publié(e) le:
    01.09.2024
  • Modifié(e) le:
    01.09.2024
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine