0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Changing Furrow Irrigation to Increase Efficiency and Feasibility Study of Reusing Surface Runoff

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Civil Engineering Journal, , n. 12, v. 3
Page(s): 1278
DOI: 10.28991/cej-030957
Abstrait:

To improve irrigation techniques and the utilization of available water resources in Iran, a first steps re evaluation of traditional irrigation methods. To assess the efficiency of furrow irrigation, a 4-ha plot (87 furrows) cultivated with sugarcane was evaluated in Khuzestan Province. The quantities of inflow, outflow runoff, soil moisture before irrigation, depth of root development and depth of water infiltration were measured and thus the values of water use efficiency, uniformity coefficient, and distribution uniformity were determined for the selected plot. Using Geographical Information System, in ArcView, the irrigation efficiency of its levels were analyzed using two furrow irrigation methods: open and closed-end. The results showed that the irrigation efficiency, uniformity coefficient and distribution uniformity for the open-end than the closed-end method. The prevention of deep infiltration losses (approximately 30% lower than for closed-end) and allowing outflow of end runoff, and depending on water quality, the riffle can be considered ideal for irrigating other surfaces.

Copyright: © 2018 Ehsan Dayer, Ebrahim Pazira, Heydar Ali Kashkuli, Hossein Sedghi
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10341100
  • Publié(e) le:
    14.08.2019
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine