Bearing Capacity of Strip Footing Built on Geogrid-Reinforced Sand over Soft Clay Slope and Subjected to a Vertical Load
Auteur(s): |
A. Hamidi
K. Abbeche |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | Electronic Journal of Structural Engineering, décembre 2019, v. 19 |
Page(s): | 23-32 |
DOI: | 10.56748/ejse.19232 |
Abstrait: |
The present work deals with the study of the behavior of a rigid striped footing, resting on a sand slope reinforced by geo-grids and located above a soft clay layer. For this purpose, numerical analysis was conducted using finite element program; Plaxis software package; where the effects of some parameters on the strip footing behavior were studied. The affecting parameters such as the number of layers of geogrids, the vertical spacing, and the slope of the sand, the depth of reinforcement and the angle of friction of the sand were considered in soil reinforcement by geogrids based on multi-series of tests. The analysis results show an improvement in the soil bearing capacity at the level of the reinforcement depth, whatever the slope of the sand and its density (loose, moderately dense and dense). This improvement was related to the important number of reinforcing elements represented by a small vertical spacing of strips. Whereas, a significant dete-rioration of the soil bearing capacity was detected in the case of steep slopes of sand whatever the number of reinforcing strips and their vertical spacing. |
- Informations
sur cette fiche - Reference-ID
10778725 - Publié(e) le:
12.05.2024 - Modifié(e) le:
12.05.2024