The basis for ductility evaluation in SFRC structures in MC2020: An investigation on slabs and shallow beams

The paper presents a synthesis of an extensive experimental campaign on linear and two‐dimensional steel fiber reinforced concrete (SFRC) structural elements carried out to check the ductility requirements aimed at guaranteeing limit analysis approaches for the computation of ultimate load‐bearing capacity of SFRC structures; special attention is devoted to the role of the degree of redundancy of the structure. In particular, full‐scale shallow beams and slabs reinforced with steel fibers (with or without conventional longitudinal reinforcement) were tested in two different laboratories: the Politecnico di Milano (PoliMI) and the University of Brescia (UniBS). In this experimental campaign, two different fiber contents and fiber types were considered. The experimental investigation, carried out within the activities to support Annex L of Eurocode 2, was fundamental also for developing the design rules included in the fib Model Code 2020 and allowed to formulate conclusions regarding optimization of the mix design, ductility, and design prediction at the ultimate capacity.