0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Automatic Generation Construction Shop Design Model of the MEP Hanger Based on BIM

Auteur(s):






Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 4, v. 13
Page(s): 867
DOI: 10.3390/buildings13040867
Abstrait:

Due to the growing complexity of mechanical, electrical and plumbing (MEP) functions, the design, production and installation of hanger based on MEP has become low efficiency in traditional ways. Compared with the Computer-Aided Design (CAD) approach, the MEP hanger three-dimensional (3D) design approach has not received adequate attention in the process of engineering practice. Based on Building Information Modeling (BIM) and Revit secondary development technology, an automatic generation construction shop design model system of MEP hanger (MEP hanger-CDM) for the quick placement of hanger components, automatic grouping of hanger components and hanger component constructability checking was developed. By conducting investigations with the construction companies and construction sites in China, four basic forms of MEP hanger layouts were identified to accommodate different types of MEP layouts. In addition, the design requirements of the family of LOD 400 BIM models were summarized along with the analysis of user requirements. The results of the case studies indicate a 70% reduction in the manpower number on the MEP hanger shop design and an 85.9% reduction in the number of working hours. Moreover, the efficiency of the hanger construction model design and the accuracy of the output of material lists and shop drawings could be improved. Thus, the process of designing MEP hanger could be optimized in a visualized method.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10728407
  • Publié(e) le:
    30.05.2023
  • Modifié(e) le:
    01.06.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine