0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Automated optimum visualization system for construction drawing reading

Auteur(s):



Médium: article de revue
Langue(s): anglais
Publié dans: Journal of Information Technology in Construction, , v. 26
Page(s): 681-696
DOI: 10.36680/j.itcon.2021.036
Abstrait:

The task of reading drawings on construction sites has significant efficiency and cost problems. Recent products utilising laser projectors attempt to address the issue of drawing comprehension by projecting full scale versions of the drawings onto 3D surfaces, giving an in-place representation of the steps required to complete a task. However, they only allow projection in red or green at a single brightness level due to the inherent constraints of using a laser-based system, which could cause problems depending on the surface to be projected on and the ambient conditions. Thus, there is a need for a solution that is able to adjust the visualisation parameters of the displayed information based on the surface being projected onto. This study presents a system that automatically changes the visualisation parameters based on the colour and texture of the current surface to make drawings visible under any planar-like surfaces. The proposed system consists of software and hardware, and the software algorithm contains of two parts 1) the optimisation run that computes and updates the visualisation parameters and 2) the detection loop which runs continually and checks if the optimisation run needs to be triggered or not. In order to verify the proposed system, tests on 8 subjects with 4 background surfaces commonly found on site were performed. The test subjects were timed to find 10 bolt holes projected onto the surface using the optimisation system, which was then compared to a control case of black lines projected onto a white background. The system allowed users to complete the task on the real-world backgrounds in the same time as the control case, with the system resulting in up to a 600% decrease in recognition time on some backgrounds.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.36680/j.itcon.2021.036.
  • Informations
    sur cette fiche
  • Reference-ID
    10641178
  • Publié(e) le:
    30.11.2021
  • Modifié(e) le:
    30.11.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine