Assessment of Photocatalytic Nano-TiO2 Mortars’ Behavior When Exposed to Simulated Indoor Conditions of Glazed Buildings

The application of nano-TiO2 as a photocatalytic agent in buildings’ internal surfaces has recently attracted attention to mitigate microorganism growth, soiling, and contamination in indoor environments. This work aimed at comparing the Rhodamine B (RhB) dye degradation efficiency of three different mortar compositions subjected to simulated internal radiation, in which nano-TiO2 (10 wt% of binder mass) was dispersed by ultrasonic and mechanical methods. Mortar specimens were produced with white Portland cement, hydrated lime, sand, and water in different volume proportions of 1:1:6 (cement:lime:sand), 1:3 (cement:sand), and 1:4 (cement:sand). The first stage of the research evaluated samples exposed to the natural outdoor environment and proved the efficiency of specimens’ photoactivity when covered by a glass layer. The second and principal phase of the study simulated indoor conditions in glazed buildings through artificial weathering in which the composition of 1:1:6 was mechanically dispersed and exhibited the highest global color change (ΔE) values for RhB staining. The main finding of the study was that the mortars exposed to simulated indoor conditions presented high ΔE grades, classified as easily perceived by the human eye. This demonstrates the photocatalytic efficiency in an internal building environment that receives radiation through a glass surface.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.