0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Applying RANSAC Algorithm for Fitting Scanning Strips from Airborne Laser Scanning

Auteur(s): (University of Warmia and Mazury in Olsztyn, Poland)
(University of Warmia and Mazury in Olsztyn, Poland)
(Gdansk University of Technology, Gdańsk, Poland)
Médium: article de revue
Langue(s): anglais
Publié dans: Civil and Environmental Engineering Reports, , n. 4, v. 23
Page(s): 29-42
DOI: 10.1515/ceer-2016-0048
Abstrait:

During the development of the data acquired by airborne laser scanning the important issue is the fitting and georeferencing of ALS point clouds by means of the tie surfaces and the reference planes. The process of scanning strips adjustment is based on mutual integration of point clouds (scanning strips) and their adaptation to the reference planes. In simultaneous adjustment all strips are combined into one geometrically coherent block, to which the coordinates are given. In the process of determining discrepancies between scanning strips it is important to determine the correct size of the shifts (offsets). Authors propose to do this by using RANSAC algorithm.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.1515/ceer-2016-0048.
  • Informations
    sur cette fiche
  • Reference-ID
    10705327
  • Publié(e) le:
    19.02.2023
  • Modifié(e) le:
    19.02.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine