0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Application of the rebound test for the technological control of concrete hollow-core slabs

Auteur(s):

Médium: article de revue
Langue(s): anglais
Publié dans: Revista IBRACON de Estruturas e Materiais, , n. 4, v. 13
DOI: 10.1590/s1983-41952020000400006
Abstrait:

Hollow-core slabs are precast elements produced with very dry concrete, which hinders the molding of cube or cylindrical specimens normally used for the technological control of the material. This paper addresses the use of the rebound test for the technological control of concrete applied to hollow-core slabs. An experimental program divided into two phases was developed. In the first phase, three concrete mixtures were produced and compressive and rebound tests were performed in cylindrical and prismatic specimens for 6 hours to 28 days for the obtaining of a correlation curve. In the second phase, a hollow-core slab was built with one of the concrete mixtures used and the same tests were applied. The results showed the rebound number correlates well with the compressive strength, which confirms the possible application of the test for the technological control of the concrete used in the construction of hollow-core slabs.

License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10462060
  • Publié(e) le:
    25.10.2020
  • Modifié(e) le:
    02.06.2021
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine