0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Applicability of Existing Crack Controlling Criteria for Structures with Large Concrete Cover Thickness

Auteur(s): (PhD Candidate., University of Stavanger , Department of Mechanical and Structural Engineering and Material Science , Stavanger. Address: Kjell Arholmsgate 41, 4036 Stavanger , Norway .)
(Associate Professor., University of Stavanger , Department of Mechanical and Structural Engineering and Material Science , Stavanger. Address: Kjell Arholmsgate 41, 4036 Stavanger , Norway .)
(Adjunct Professor., University of Stavanger , Department of IMBM. Manager Concrete Technology . Aker Solutions, Stavanger, NO 4020.)
Médium: article de revue
Langue(s): anglais
Publié dans: Nordic Concrete Research, , n. 1, v. 64
Page(s): 69-91
DOI: 10.2478/ncr-2021-0002
Abstrait:

Widely used crack width calculation models and allowable crack width limits have changed from time to time and differ from region to region. It can be identified that some crack width calculation models consist with limitations for parameters like cover thickness. The current Norwegian requirement for cover thickness is larger than these limitations. The applicability of existing crack width calculation models and the allowable crack width limits must be verified for structures with large cover thickness. The background of crack width calculation models in Eurocode, Model Code 2010, Japanese code, American code and British code have been examined. By comparing the experimental crack widths with the predictions of the aforementioned models, the existing codes can be identified as requiring modification. Considering the durability aspect, it can be identified a long-term study proving that the allowable crack width can be increased with the increase in cover thickness. When considering the aesthetic aspect, the authors suggest categorizing the structures based on their prestige level and deciding the allowable crack widths accordingly. The paper proposes potential solutions for future research on how to improve both crack width calculation methods and allowable crack width limits to be used effectively in structures with large cover thickness.

Structurae ne peut pas vous offrir cette publication en texte intégral pour l'instant. Le texte intégral est accessible chez l'éditeur. DOI: 10.2478/ncr-2021-0002.
  • Informations
    sur cette fiche
  • Reference-ID
    10705825
  • Publié(e) le:
    19.02.2023
  • Modifié(e) le:
    19.02.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine