• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil


An Anchorage Technique for Shear Strengthening of RC T-Beams Using NSM-BFRP Bars and BFRP Sheet

  1. American Concrete Institute (2004). Guide test methods for fiber-reinforced polymers (FRPs) for reinforcing or strengthening concrete structures. ACI 440.3R-04, Farmington Hills, MI.
  2. American Concrete Institute (2015). Guide for the design and construction of structural concrete reinforced with Fiber-Reinforced Polymer (FRP) bars. ACI 440.1R-15, Farmington Hills, MI.
  3. American Society for Testing and Materials (ASTM) (1997). Standard Test Methods and Definitions for Mechanical Testing of Steel Products. ASTM A370-97a, West Conshohocken, PA.
  4. Anwarul Islam, A. K. M. (2009): Effective methods of using CFRP bars in shear strengthening of concrete girders. Dans: Engineering Structures, v. 31, n. 3 (mars 2009).


  5. Barros, J. A. O., & Dias, S. J. E. (2006). Near surface mounted CFRP laminates for shear strengthening of concrete beams. Cement and Concrete Composites,28(3), 276–292.


  6. Bianco, Vincenzo / Barros, J. A. O. / Monti, Giorgio (2009): Three dimensional mechanical model for simulating the NSM FRP strips shear strength contribution to RC beams. Dans: Engineering Structures, v. 31, n. 4 (avril 2009).


  7. Bilotta, A., Ceroni, F., Nigro, E., & Pecce, M. (2015). Efficiency of CFRP NSM strips and EBR plates for flexural strengthening of RC beams and loading pattern influence. Composite Structures,124, 163–175.


  8. Chen, W., Pham, T., Sichembe, H., Chen, L., & Hao, H. (2018). Experimental study of flexural behaviour of RC beams strengthened by longitudinal and U-shaped basalt FRP sheet. Composite Part B,134, 114–126.


  9. Chen, G. M. / Teng, J. G. / Chen, J. F. (2013): Shear Strength Model for FRP-Strengthened RC Beams with Adverse FRP-Steel Interaction. Dans: Journal of Composites for Construction, v. 17, n. 1 (février 2013).


  10. De Lorenzis, L., & Nanni, A. (2001). Shear strengthening of reinforced concrete beams with NSM fiber-reinforced polymer rods. Structural Journal,98(1), 60–68.
  11. Diab HM, Wu Z (2009). Bond Behaviour of Different FRP Sheets. In: Proceedings of the 9th International Symposium of the Fiber-Reinforced Polymer Reinforcement for Reinforced Concrete Structures (FRPRCS-9), Sydney, Australia.
  12. Diab, Hesham / Wu, Zhishen / Iwashita, Kentaro (2009): Short and long-term bond performance of prestressed FRP sheet anchorages. Dans: Engineering Structures, v. 31, n. 5 (mai 2009).


  13. Dias, S. J. E. / Barros, J. A. O. (2010): Performance of reinforced concrete T beams strengthened in shear with NSM CFRP laminates. Dans: Engineering Structures, v. 32, n. 2 (février 2010).


  14. Dias, S. J. E., & Barros, J. A. O. (2011). Shear strengthening of RC T-section beams with low strength concrete using NSM CFRP laminates. Cement and Concrete Composites,33(2), 334–345.


  15. Egyptian Code of Practice (2007). Design and Construction for Reinforced Concrete Structures. ECP 203-2007, Research Center for Housing, Building and Physical Planning, Cairo, Egypt.
  16. Elmahdy, A., & Verleysen, P. (2020). Mechanical behavior of basalt and glass textile composites at high strain rates: A comparison. Polymer Testing,81, 106224.


  17. Jalali, Meysam / Kazem Sharbatdar, M. / Chen, Jian-Fei / Alaee, Farshid Jandaghi (2012): Shear strengthening of RC beams using innovative manually made NSM FRP bars. Dans: Construction and Building Materials, v. 36 (novembre 2012).


  18. Kalfat, R. / Al-Mahaidi, R. / Smith, Scott T. (2013): Anchorage Devices Used to Improve the Performance of Reinforced Concrete Beams Retrofitted with FRP Composites: State-of-the-Art Review. Dans: Journal of Composites for Construction, v. 17, n. 1 (février 2013).


  19. Kemapoxy 165. Non-Shrink Epoxy adhesive Mortar and Grouting Compound and for fixing steel bars into concrete under water. http://cmbegypt.com/cmb/en/wp-content/pdf/Chemical_construction/06_construction_repair_strengthening/5.kemapoxy%20165/kemapoxy%20165.pdf
  20. Koutas, L. / Triantafillou, T. C. (2013): Use of Anchors in Shear Strengthening of Reinforced Concrete T-Beams with FRP. Dans: Journal of Composites for Construction, v. 17, n. 1 (février 2013).


  21. Lebedev, M. P., Startsev, O. V., & Kychkin, A. K. (2020). The effects of aggressive environments on the mechanical properties of basalt plastics. Heliyon,6(3), e03481.


  22. Mofidi, Amir / Chaallal, Omar / Benmokrane, Brahim / Neale, Kenneth (2012): Experimental Tests and Design Model for RC Beams Strengthened in Shear Using the Embedded Through-Section FRP Method. Dans: Journal of Composites for Construction, v. 16, n. 5 (octobre 2012).


  23. Mofidi, Amir / Chaallal, Omar / Cheng, Lijuan / Shao, Yixin (2016): Investigation of Near Surface–Mounted Method for Shear Rehabilitation of Reinforced Concrete Beams Using Fiber Reinforced–Polymer Composites. Dans: Journal of Composites for Construction, v. 20, n. 2 (avril 2016).


  24. Rahal, K. N., & Rumaih, H. A. (2011). Tests on reinforced concrete beams strengthened in shear using near surface mounted CFRP and steel bars. Engineering Structures,33(1), 53–62.


  25. Rizzo, Andrea / De Lorenzis, Laura (2009): Behavior and capacity of RC beams strengthened in shear with NSM FRP reinforcement. Dans: Construction and Building Materials, v. 23, n. 4 (avril 2009).


  26. Sharbatdar, M. K., & Jaberi, M. (2018). Flexural and shear strengthening of RC beams with NSM technique and manually made CFRP bars. Scientia Iranica,25(4), 2012–2025.
  27. Shekarchi, William A. / Ghannoum, Wassim M. / Jirsa, James O. (2018): Use of Anchored Carbon Fiber-Reinforced Polymer Strips for Shear Strengthening of Large Girders. Dans: ACI Structural Journal, v. 115, n. 1 (janvier 2018).


  28. Sikadur®-330. Product Data sheet-adhesive for bonding reinforcement. https://egy.sika.com/dms/getdocument.get/b5ed2585-b802-3ef0-8825-c669aa8542e3/Sikadur_330.pdf
  29. Sim, J., Park, C., & Moon, D. Y. (2005). Characteristics of basalt fiber as a strengthening material for concrete structures. Composites Part B: Engineering,36, 504–512.


  30. Sundarraja, M. C. / Rajamohan, S. (2009): Strengthening of RC beams in shear using GFRP inclined strips – An experimental study. Dans: Construction and Building Materials, v. 23, n. 2 (février 2009).


  31. Shanxi Basalt Fiber Technology Co., Ltd http://www.sxcbf.com/en/sjxmmore.asp?c_id=48&hiden=39
  32. Sikadur®-30. Product Data sheet-adhesive for bonding reinforcement. https://egy.sika.com/dms/getdocument.get/a470020f-8c78-314e-89f1-3862b8560f7f/Sikadur%20-30.pdf
  33. Wang, X., Shi, J., Liu, J., Yang, L., & Wu, Z. (2014). Creep behavior of basalt fiber reinforced polymer tendons for prestressing application. Materials and Design,59, 558–564.


  34. Wang, Zike / Zhao, Xiao-Ling / Xian, Guijun / Wu, Gang / Singh Raman, R. K. (2017): Long-term durability of basalt- and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment. Dans: Construction and Building Materials, v. 139 (mai 2017).


  35. Wiwatrojanagul, P., Ayudhya, B. I. N., & Sahamitmongkol, R. (2012). NSM FRP shear strengthening of RC beams with internal stirrups. Thammasat International Journal Science Technology,17(1), 16–30.
  36. Wu, Z. S., Wang, X., Iwashita, K., Sasaki, T., & Hamaguchi, Y. (2010). Tensile fatigue behaviour of FRP and hybrid FRP sheets. Composites Part B Engineering,41, 396–402.



  • Informations
    sur cette fiche
  • Reference-ID
  • Publié(e) le:
  • Modifié(e) le: