Analytical Method for the Deformation-Based Design of Retaining Walls in Asymmetric Excavation

Conventional methods for designing retaining structures are not applicable to asymmetric excavation or deformation-based designs. This study proposes a quadruple-line displacement-dependent earth pressure coefficient model. Based on the proposed model, an analytical solution was developed to facilitate the deformation-based design of the asymmetric length of retaining walls propped at the crest. Furthermore, the effects of the soil internal friction angle, strut stiffness, excavation asymmetry level, and deformation control value on the embedment ratio (Re) of retaining walls were investigated. The results showed that Re determined by the classical equivalent-beam method is unsafe due to its basis on the ultimate-state earth pressure theory. The Re value of the shallower side exhibited greater sensitivity to asymmetric excavation than that of the deeper side. The retaining structure’s required Re decreased with an increase in the excavation asymmetry level. The required Re on either side of the retaining structure decreased as the deformation control values increased. The controlled deformation had a more obvious effect on the Re value of the retaining structure on the deeper side. The proposed method can be used for the deformation-based design of asymmetric wall lengths of retaining structures propped at the crest, considering the different excavation depths on both sides.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.