Analysis of stiffness and fatigue resistance of cold recycled asphalt mixtures manufactured with foamed bitumen for their application to airfield pavement design
Auteur(s): |
H. I. Lacalle-Jiménez
J. P. Edwards N. H. Thom |
---|---|
Médium: | article de revue |
Langue(s): | espagnol |
Publié dans: | Materiales de Construccion, juillet 2017, n. 80, v. 7 |
Page(s): | 127 |
DOI: | 10.3989/mc.2017.04616 |
Abstrait: |
Cold recycled bound materials (CRBMs) provide an economic and environmental advantage for pavements since they decrease energy and raw material consumption. However, design methods for airfield pavements do not include key CRBM properties. In this paper an empirical-mechanistic method is used to study airfield pavement design with CRBM in order to develop design guidance. The aim of the paper is to obtain the inputs related to material properties needed for use in this method. For this purpose, CRBM containing reclaimed asphalt, with fly ash, cement and foamed bitumen as stabilising agents, was characterised. The methodology included indirect tensile stiffness modulus (ITSM) and indirect tensile fatigue tests (ITFT) in strain control mode. The inputs needed for a pavement design analysis with CRBM were then obtained. The results showed the importance of further study on CRBM fatigue to understand the behaviour of these mixes under cyclic loading. |
- Informations
sur cette fiche - Reference-ID
10516982 - Publié(e) le:
10.12.2020 - Modifié(e) le:
19.02.2021