0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

An Analysis of Real-Time Measured Solar Radiation and Daylight and Its Energy Implications for Semi-Transparent Building-Integrated Photovoltaic Façades

Auteur(s):
ORCID
ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 2, v. 13
Page(s): 386
DOI: 10.3390/buildings13020386
Abstrait:

For analyzing cooling loads, day-lighting, and building-integrated photovoltaic (BIPV) systems, solar radiation and daylight illuminance data are required. However, these data are sparse. Furthermore, studies have shown that the energy potential of building-integrated photovoltaic (BIPV) systems for the entire building skin (BS) and unconventional orientations, such as east, west, and north need further exploration. Thus, this study presents findings from measured solar data and an energy analysis of semi-transparent BIPV. Firstly, solar radiation and daylight data measured from June 2019 to May 2020 in Hong Kong are presented. The analyzed solar-radiation data were used to determine the solar-energy potential of BIPV for BS and the four principal building orientations (i.e., N, E, S and W). With a simple analytical approach, the solar data’s building-energy implications for semi-transparent BIPV were assessed. The findings showed that the annual average horizontal global-, diffuse-, and direct-irradiance values were 291.8, 164.3, and 127.5 W/m²/day, respectively. Similarly, 120, 72, and 107 klux were obtained as the peak global, diffuse, and direct illuminance, respectively. Furthermore, the results show the potential of using BIPV on the entire BS in Hong Kong. It was also observed that a semi-transparent BIPV façade integrated with daylight-linked lighting controls could offer significant energy savings in electric lighting and cooling while also producing energy. In particular, BIPV façades with a large window-to-wall ratio (WWR) of 80% can provide an overall energy benefit of up to 7126 kWh.

Copyright: © 2023 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10712263
  • Publié(e) le:
    21.03.2023
  • Modifié(e) le:
    10.05.2023
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine