Analysis of Large-Strain Consolidation Behavior of Soil with High Water Content in Consideration of Self-Weight

Based on the axisymmetric large-strain consolidation (ALSC) model with the void ratio as the variable under equal strain condition, difference schemes of model’s equation, initial condition, and boundary condition were given. Taking phosphatic clay in Florida as a research object, the consolidation behaviors of soil with high water content by axisymmetric large-strain theory and one-dimensional large-strain theory were analyzed. The effect of different kinds of consolidation theories and self-weight stress on an average degree of consolidation was evaluated. The development of the void ratio and excess pore water pressure along the soil layer was clarified. The results show that the theoretical value of Terzaghi’s consolidation degree is always less than that of ALSC (_Us, the average degree of consolidation defined by strain)-vertical drainage in the consolidation process. Terzaghi’s solution overestimates the dissipation rate of excess pore water pressure during the earlier consolidation period but underestimates it during the later consolidation period. The degree of consolidation calculated by Hansbo develops faster than ALSC (_Up, the average degree of consolidation defined by stress)-radial drainage, but slower than ALSC (_Us)-radial drainage. In the ALSC model,_Usis always been faster than_Up. The effect of self-weight on the consolidation degree of axisymmetric large-strain consolidation theory is relatively small (maximum error is less than 16%), while it can accelerate the consolidation rate of soil in one-dimensional large-strain consolidation theory largely. When only the vertical drainage occurs, the consolidation rate in the middle of the soil is obviously lagging the upper and lower parts, while the radial drainage can reduce the void ratio and the excess pore water pressure along the soil layer uniformly and more rapidly.

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.