• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Analysis of Failures and Influence Factors of Critical Infrastructures: A Case of Metro

  1. Wang Xin-Rui (2015), "The new urbanization policy in China: Which way forward?" in Habitat International, v. 47, Elsevier BV, p. 279-284

    https://doi.org/10.1016/j.habitatint.2015.02.001

  2. Tirachini Alejandro (2014), "Multimodal pricing and optimal design of urban public transport: The interplay between traffic congestion and bus crowding" in Transportation Research Part B: Methodological, v. 61, Elsevier BV, p. 33-54

    https://doi.org/10.1016/j.trb.2014.01.003

  3. Balducelli C. (2007), "Safeguarding information intensive critical infrastructures against novel types of emerging failures" in Reliability Engineering & System Safety, v. 92, n. 9, Elsevier BV, p. 1218-1229

    https://doi.org/10.1016/j.ress.2006.08.006

  4. Wang Shuliang (2012), "Vulnerability analysis of interdependent infrastructure systems: A methodological framework" in Physica A: Statistical Mechanics and its Applications, v. 391, n. 11, Elsevier BV, p. 3323-3335

    https://doi.org/10.1016/j.physa.2011.12.043

  5. Colombi C. (2013), "Particulate matter concentrations, physical characteristics and elemental composition in the Milan underground transport system" in Atmospheric Environment, v. 70, Elsevier BV, p. 166-178

    https://doi.org/10.1016/j.atmosenv.2013.01.035

  6. Zhang Xiaoling (2016), "An incident database for improving metro safety: The case of shanghai" in Safety Science, v. 84, Elsevier BV, p. 88-96

    https://doi.org/10.1016/j.ssci.2015.11.023

  7. Kyriakidis Miltos (2012), "Metro railway safety: An analysis of accident precursors" in Safety Science, v. 50, n. 7, Elsevier BV, p. 1535-1548

    https://doi.org/10.1016/j.ssci.2012.03.004

  8. Jiang C.S. (2010), "Effect of varying two key parameters in simulating evacuation for subway stations in China" in Safety Science, v. 48, n. 4, Elsevier BV, p. 445-451

    https://doi.org/10.1016/j.ssci.2009.12.004

  9. in Journal of the China Railway Society, v. 5 (2011), p. 14
  10. Lu Ying (2011), "Developing fuzzy signal detection theory for workers’ hazard perception measures on subway operations" in Safety Science, v. 49, n. 3, Elsevier BV, p. 491-497

    https://doi.org/10.1016/j.ssci.2010.11.008

  11. Ding Jianlong (2013), "SOMS: A Subway Operation and Maintenance System Based on Planned Maintenance Model with Train State" in Journal of Intelligent Learning Systems and Applications, v. 05, n. 04, Scientific Research Publishing, Inc,, p. 195-202

    https://doi.org/10.4236/jilsa.2013.54021

  12. Lu Ying (2013), "Case-based reasoning for automated safety risk analysis on subway operation: Case representation and retrieval" in Safety Science, v. 57, Elsevier BV, p. 75-81

    https://doi.org/10.1016/j.ssci.2013.01.020

  13. Luo Na (2014), "Smoke confinement utilizing the USME ventilation mode for subway station fire" in Safety Science, v. 70, Elsevier BV, p. 202-210

    https://doi.org/10.1016/j.ssci.2014.06.002

  14. Yang Yuhao (2015), "Robustness assessment of urban rail transit based on complex network theory: A case study of the Beijing Subway" in Safety Science, v. 79, Elsevier BV, p. 149-162

    https://doi.org/10.1016/j.ssci.2015.06.006

  15. Louie Jacob (2017), "Modelling the impact of causal and non-causal factors on disruption duration for Toronto’s subway system: An exploratory investigation using hazard modelling" in Accident Analysis & Prevention, v. 98, Elsevier BV, p. 232-240

    https://doi.org/10.1016/j.aap.2016.10.008

  16. Li Qiming (2017), "A new approach to understand metro operation safety by exploring metro operation hazard network (MOHN)" in Safety Science, v. 93, Elsevier BV, p. 50-61

    https://doi.org/10.1016/j.ssci.2016.10.010

  17. Song Liangliang (2017), "Using an AHP-ISM Based Method to Study the Vulnerability Factors of Urban Rail Transit System" in Sustainability, v. 9, n. 6, MDPI AG, p. 1065

    https://doi.org/10.3390/su9061065

  18. Deng Yongliang (2018), "Evaluation and reduction of vulnerability of subway equipment: An integrated framework" in Safety Science, v. 103, Elsevier BV, p. 172-182

    https://doi.org/10.1016/j.ssci.2017.10.017

  19. Petrović Dejan V. (2014), "Risk assessment model of mining equipment failure based on fuzzy logic" in Expert Systems with Applications, v. 41, n. 18, Elsevier BV, p. 8157-8164

    https://doi.org/10.1016/j.eswa.2014.06.042

  20. Carpitella Silvia (2018), "A combined multi-criteria approach to support FMECA analyses: A real-world case" in Reliability Engineering & System Safety, v. 169, Elsevier BV, p. 394-402

    https://doi.org/10.1016/j.ress.2017.09.017

  21. Nouri.Gharahasanlou Ali (2014), "Fault tree analysis of failure cause of crushing plant and mixing bed hall at Khoy cement factory in Iran" in Case Studies in Engineering Failure Analysis, v. 2, n. 1, Elsevier BV, p. 33-38

    https://doi.org/10.1016/j.csefa.2013.12.006

  22. Giardina M. (2015), "Safety study of an LNG regasification plant using an FMECA and HAZOP integrated methodology" in Journal of Loss Prevention in the Process Industries, v. 35, Elsevier BV, p. 35-45

    https://doi.org/10.1016/j.jlp.2015.03.013

  23. Levitin Gregory (2014), "Optimal connecting elements allocation in linear consecutively-connected systems with phased mission and common cause failures" in Reliability Engineering & System Safety, v. 130, Elsevier BV, p. 85-94

    https://doi.org/10.1016/j.ress.2014.04.028

  24. Chin Kwai-Sang (2009), "Failure mode and effects analysis by data envelopment analysis" in Decision Support Systems, v. 48, n. 1, Elsevier BV, p. 246-256

    https://doi.org/10.1016/j.dss.2009.08.005

  25. Kutlu Ahmet Can (2012), "Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP" in Expert Systems with Applications, v. 39, n. 1, Elsevier BV, p. 61-67

    https://doi.org/10.1016/j.eswa.2011.06.044

  26. Chang Kuei-Hu (2013), "Enhancing FMEA assessment by integrating grey relational analysis and the decision making trial and evaluation laboratory approach" in Engineering Failure Analysis, v. 31, Elsevier BV, p. 211-224

    https://doi.org/10.1016/j.engfailanal.2013.02.020

  27. Mentes Ayhan (2015), "A FSA based fuzzy DEMATEL approach for risk assessment of cargo ships at coasts and open seas of Turkey" in Safety Science, v. 79, Elsevier BV, p. 1-10

    https://doi.org/10.1016/j.ssci.2015.05.004

  28. Rafie Meraj (2015), "Prediction of subsidence risk by FMEA using artificial neural network and fuzzy inference system" in International Journal of Mining Science and Technology, v. 25, n. 4, Elsevier BV, p. 655-663

    https://doi.org/10.1016/j.ijmst.2015.05.021

  29. Renu Rahul (2016), "A Knowledge Based FMEA to Support Identification and Management of Vehicle Flexible Component Issues" in Procedia CIRP, v. 44, Elsevier BV, p. 157-162

    https://doi.org/10.1016/j.procir.2016.02.112

  30. Renjith V.R. (2018), "Fuzzy FMECA (failure mode effect and criticality analysis) of LNG storage facility" in Journal of Loss Prevention in the Process Industries, v. 56, Elsevier BV, p. 537-547

    https://doi.org/10.1016/j.jlp.2018.01.002

  31. Dongiovanni Danilo Nicola (2016), "Failure rate modeling using fault tree analysis and Bayesian network: DEMO pulsed operation turbine study case" in Fusion Engineering and Design, v. 109-111, Elsevier BV, p. 613-617

    https://doi.org/10.1016/j.fusengdes.2016.02.036

  32. Zhou Anmei (2015), "A research on intelligent fault diagnosis of wind turbines based on ontology and FMECA" in Advanced Engineering Informatics, v. 29, n. 1, Elsevier BV, p. 115-125

    https://doi.org/10.1016/j.aei.2014.10.001

  33. Hassija Varun (2014), "A pragmatic approach to estimate alpha factors for common cause failure analysis" in Annals of Nuclear Energy, v. 63, Elsevier BV, p. 317-325

    https://doi.org/10.1016/j.anucene.2013.07.053

  34. Chen Ying-Chu (2015), "Constructing an effective prevention mechanism for MSW lifecycle using failure mode and effects analysis" in Waste Management, v. 46, Elsevier BV, p. 646-652

    https://doi.org/10.1016/j.wasman.2015.09.003

  35. Yang Yongsheng (2017), "Corrosion induced failure analysis of subsea pipelines" in Reliability Engineering & System Safety, v. 159, Elsevier BV, p. 214-222

    https://doi.org/10.1016/j.ress.2016.11.014

  36. Peeters J.F.W. (2018), "Improving failure analysis efficiency by combining FTA and FMEA in a recursive manner" in Reliability Engineering & System Safety, v. 172, Elsevier BV, p. 36-44

    https://doi.org/10.1016/j.ress.2017.11.024

  37. Jun Li (2012), "Reliability Analysis of Aircraft Equipment Based on FMECA Method" in Physics Procedia, v. 25, Elsevier BV, p. 1816-1822

    https://doi.org/10.1016/j.phpro.2012.03.316

  38. Onofrio Rossella (2015), "Failure Mode, Effects and Criticality Analysis (FMECA) for Medical Devices: Does Standardization Foster Improvements in the Practice?" in Procedia Manufacturing, v. 3, Elsevier BV, p. 43-50

    https://doi.org/10.1016/j.promfg.2015.07.106

  39. in Journal of Intelligent & Fuzzy Systems, v. 21 (2010), p. 135

    https://doi.org/10.3233/IFS-2010-0442

  40. Ravi Sankar Nune (2001), "Modified approach for prioritization of failures in a system failure mode and effects analysis" in International Journal of Quality & Reliability Management, v. 18, n. 3, Emerald, p. 324-336

    https://doi.org/10.1108/02656710110383737

  41. Catelani Marcantonio (2013), "Electrical performances optimization of Photovoltaic Modules with FMECA approach" in Measurement, v. 46, n. 10, Elsevier BV, p. 3898-3909

    https://doi.org/10.1016/j.measurement.2013.08.003

  42. Sinha Y. (2015), "A progressive study into offshore wind farm maintenance optimisation using risk based failure analysis" in Renewable and Sustainable Energy Reviews, v. 42, Elsevier BV, p. 735-742

    https://doi.org/10.1016/j.rser.2014.10.087

  43. Bielza Concha (2011), "A review of representation issues and modeling challenges with influence diagrams" in Omega, v. 39, n. 3, Elsevier BV, p. 227-241

    https://doi.org/10.1016/j.omega.2010.07.003

  44. Kendrick D. C. (2007), "Crossing the Evidence Chasm: Building Evidence Bridges from Process Changes to Clinical Outcomes" in Journal of the American Medical Informatics Association, v. 14, n. 3, Oxford University Press (OUP), p. 329-339

    https://doi.org/10.1197/jamia.m2327

  45. Gómez Manuel (2007), "A Graphical Decision-Theoretic Model for Neonatal Jaundice" in Medical Decision Making, v. 27, n. 3, SAGE Publications, p. 250-265

    https://doi.org/10.1177/0272989x07300605

  46. Brynielsson Joel (2007), "Using AI and games for decision support in command and control" in Decision Support Systems, v. 43, n. 4, Elsevier BV, p. 1454-1463

    https://doi.org/10.1016/j.dss.2006.06.012

  47. Kaupp Tobias (2010), "Human–robot communication for collaborative decision making — A probabilistic approach" in Robotics and Autonomous Systems, v. 58, n. 5, Elsevier BV, p. 444-456

    https://doi.org/10.1016/j.robot.2010.02.003

  48. Scala Natalie M. (2014), "Managing Nuclear Spare Parts Inventories: A Data Driven Methodology" in IEEE Transactions on Engineering Management, v. 61, n. 1, Institute of Electrical and Electronics Engineers (IEEE), p. 28-37

    https://doi.org/10.1109/tem.2013.2283170

  49. Rashid H.S.J. (2015), "Helicopter MGB oil system failure analysis using influence diagrams and random failure probabilities" in Engineering Failure Analysis, v. 50, Elsevier BV, p. 7-19

    https://doi.org/10.1016/j.engfailanal.2014.12.013

  50. Zheng Haoyang (2017), "Fuzzy evidential influence diagram and its evaluation algorithm" in Knowledge-Based Systems, v. 131, Elsevier BV, p. 28-45

    https://doi.org/10.1016/j.knosys.2017.05.024

  51. Bielza C. (2010), "Modeling challenges with influence diagrams: Constructing probability and utility models" in Decision Support Systems, v. 49, n. 4, Elsevier BV, p. 354-364

    https://doi.org/10.1016/j.dss.2010.04.003

  52. Mardani Abbas (2015), "Fuzzy multiple criteria decision-making techniques and applications – Two decades review from 1994 to 2014" in Expert Systems with Applications, v. 42, n. 8, Elsevier BV, p. 4126-4148

    https://doi.org/10.1016/j.eswa.2015.01.003

  53. Liou Tian-Shy (1992), "Ranking fuzzy numbers with integral value" in Fuzzy Sets and Systems, v. 50, n. 3, Elsevier BV, p. 247-255

    https://doi.org/10.1016/0165-0114(92)90223-q

  54. Braglia Marcello (2000), "MAFMA: multi‐attribute failure mode analysis" in International Journal of Quality & Reliability Management, v. 17, n. 9, Emerald, p. 1017-1033

    https://doi.org/10.1108/02656710010353885

Publicité

  • Informations
    sur cette fiche
  • Reference-ID
    10414048
  • Publié(e) le:
    26.02.2020
  • Modifié(e) le:
    26.02.2020