Advances in Properties of Rubber Reinforced Soil
|Médium:||article de revue|
|Publié dans:||Advances in Civil Engineering, janvier 2020, v. 2020|
The accumulation of waste tires is a global resource and environmental problem. The landfill or incineration of tires will infiltrate toxic chemicals into the surrounding environment, which poses a serious ecological threat to the environment. A large number of studies have shown that waste tires can be used in geotechnical engineering, which provides a good idea for the recycling of waste tires. Up to now, researchers have tested the performance of soil mixed with waste tires by dynamic triaxial test, California load ratio test, unconfined compression test, direct shear test, consolidation test, and expansive force test. The results show that the stability and strength of the soil can be enhanced by adding about 20% rubber particles to the expansive soil, and the expansion, contraction, and consolidation characteristics of the expansive soil can be significantly improved. Rubber can improve the mechanical properties and deformation properties of sand. The rubber sand with a rubber content of 30% is often used as the isolation layer of middle and low buildings. However, it remains to be seen whether it is sustainable and durable to use waste tire rubber to improve soil properties and whether the chemical composition of waste tire rubber will have adverse effects on soil. So, more researchers are encouraged to look into this question. Here, we review the method and effect of rubber reinforcement technology with scrap tires and introduce the practical application of rubber reinforcement technology in engineering, such as specific engineering projects for retaining wall, road filling, shock absorption, and vibration isolation. This review will be of great significance and broad prospects for the reuse of waste tires and the development of geotechnical engineering.
|Copyright:||© Zhongnian Yang et al. et al.|
Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.
sur cette fiche
- Publié(e) le:
- Modifié(e) le: