0
  • DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

Advanced Recycling of Modified EDPM Rubber in Bituminous Asphalt Paving

Auteur(s): ORCID


ORCID
Médium: article de revue
Langue(s): anglais
Publié dans: Buildings, , n. 6, v. 14
Page(s): 1618
DOI: 10.3390/buildings14061618
Abstrait:

One of the environmental problems worldwide is the enormous number of surgical masks used during the COVID-19 pandemic due to the measures imposed by the World Health Organization on the mandatory use of masks in public spaces. The current study is a potential circular economy approach to recycling the surgical masks discarded into the environment during the COVID-19 pandemic for use in bituminous asphalt pavement. FTIR analysis showed that the surgical masks used were made from ethylene propylene diene monomer (EPDM) rubber modified with polypropylene. The effects of the addition of surgical masks in bituminous asphalt on the performance of the base course were demonstrated in this study. The morphology and elemental composition of the bituminous asphalt pavement samples with two ratios of surgical mask composition were investigated by SEM-EDX and the performance of the modified bituminous asphalt pavement was determined by Marshall stability, flow rate, solid–liquid ratio, apparent density, and water absorption. The study refers to the technological innovation of using surgical masks in the formulation of AB 31.5 bituminous asphalt base course, which brings tremendous benefits to the environment by reducing the damage caused by the COVID-19 pandemic.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10788020
  • Publié(e) le:
    20.06.2024
  • Modifié(e) le:
    25.01.2025
 
Structurae coopère avec
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine