Advanced Optimization Design of Cross Beams Structure
Auteur(s): |
Ke Zhang
Xuan Mu Dehong Zhao Yuhou Wu |
---|---|
Médium: | article de revue |
Langue(s): | anglais |
Publié dans: | The Open Civil Engineering Journal, juin 2015, n. 1, v. 8 |
Page(s): | 117-123 |
DOI: | 10.2174/1874149501408010117 |
Abstrait: |
Solid Isotropic Microstructure with Penalization(SIMP) in topology optimization was deeply analyzed, and thus SIMP topology optimization criteria algorithm was deduced. Simulation analysis to the results was also conducted by Ansys, so as the structural lightweight design to machine crossbeams of the HTM series gantry. By verifying, the structure was 3.8% lower than the traditional structure quality, stiffness increased by 16.07%, and the overall inherent frequency was improved. By applying topology optimization method to the design process of the machining center HTM series, ma-terial utilization is improved and production costs were reduced. |
Copyright: | © 2015 Ke Zhang et al. |
License: | Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original. |
0.57 MB
- Informations
sur cette fiche - Reference-ID
10175738 - Publié(e) le:
02.01.2019 - Modifié(e) le:
02.06.2021