• DE
  • EN
  • FR
  • Base de données et galerie internationale d'ouvrages d'art et du génie civil

Publicité

An Adjustment Method for the Suspender Tension of CFSTTTHAB Based on Influence Matrix of Single Suspender

Auteur(s):




Médium: article de revue
Langue(s): en 
Publié dans: Advances in Civil Engineering, , v. 2020
Page(s): 1-10
DOI: 10.1155/2020/1232835
Abstrait:

Based on the funding project “a concrete-filled steel tube truss type half-through arch bridge (CFSTTTHAB) with the span of 220 m,” in view of the difference of tension between one pair of suspenders, this paper proposed an improved influence matrix method for the tension of a single suspender, which was developed from a conventional influence matrix. A method for adjusting suspender tension at the completed state of construction by using numerical simulation and iterative algorithm was also presented. Finite element numerical model was used to calculate the influence matrix of a single suspender. Moreover, an iterative algorithm was used to solve the adjustment value of suspender tension. Based on the proposed method, by processing several iterations, the difference between the measured and designed suspender tension would be controlled within 6% in the projects of suspender tension adjustment. Finally, the comparison between the measured and designed suspender tension at the completed state of construction proved the feasibility and accuracy satisfaction of the proposed method for engineering requirement.

Copyright: © 2020 Longlin Wang et al. et al.
License:

Cette oeuvre a été publiée sous la license Creative Commons Attribution 4.0 (CC-BY 4.0). Il est autorisé de partager et adapter l'oeuvre tant que l'auteur est crédité et la license est indiquée (avec le lien ci-dessus). Vous devez aussi indiquer si des changements on été fait vis-à-vis de l'original.

  • Informations
    sur cette fiche
  • Reference-ID
    10429524
  • Publié(e) le:
    14.08.2020
  • Modifié(e) le:
    14.08.2020