Engineering Structures - November 2017

Published:	November 2017

Articles in this Issue

Author(s)	Title	Page(s)
Weng, J. / Tan, K. H. / Lee, C. K.	Adaptive superelement modeling for progressive collapse analysis of reinforced concrete frames	136-152
Zou, Lianghao / Shi, Tianyi / Song, Jie / Cai, C. S.	Application of the high-frequency base balance technique to tall slender structures considering the effects of higher modes	1-10
Lyu, Mengning / Zhu, Xinqun / Yang, Qingshan	Bilinear connection stiffness identification of heritage timber buildings with limited strain measurements	665-681
Sun, Limin / Hong, Dongxiao / Chen, Lin	Cables interconnected with tuned inerter damper for vibration mitigation	57-67
Rasheed, Hayder A. / Al-Masri, Rund / Alali, Bacim	Closed form stability solution of simply supported anisotropic laminated composite plates under axial compression compared with experiments	327-336
Alhasawi, Anas / Heng, Piseth / Hjiaj, Mohammed / Guezouli, Samy / Battini, Jean-Marc	Co-rotational planar beam element with generalized elasto-plastic hinges	188-205
Ferreira, João / Real, Paulo Vila / Couto, Carlos	Comparison of the General Method with the Overall Method for the out-of-plane stability of members with lateral restraints	153-172
Zhang, W. / Chen, J. / Zhang, Y. F. / Yang, X. D.	Continuous model and nonlinear dynamic responses of circular mesh antenna clamped at one side	115-135
Ma, Jia-Lin / Chan, Tak-Ming / Young, Ben	Design of cold-formed high strength steel tubular beams	432-443
Arrayago, I. / Real, E. / Mirambell, E.	Design of stainless steel continuous beams with tubular cross-sections	422-431
Wang, W. / Morgenthal, G.	Dynamic analyses of square RC pier column subjected to barge impact using efficient models	20-32
Ganesan, N. / Indira, P. V. / Irshad, P.	Effect of ferrocement infill on the strength and behavior of RCC frames under reverse cyclic loading	273-281
Looi, D. T. W. / Su, R. K. L. / Cheng, B. / Tsang, H. H.	Effects of axial load on seismic performance of reinforced concrete walls with short shear span	312-326
Nozari, Amin / Behmanesh, Iman / Yousefianmoghadam, Seyedsina / Moaveni, Babak / Stavridis, Andreas	Effects of variability in ambient vibration data on model updating and damage identification of a 10-story building	540-553
Tang, Yaqiong / Li, Tuanjie	Equivalent-force density method as a shape-finding tool for cable-membrane structures	11-19
Khorramian, Koosha / Sadeghian, Pedram	Experimental and analytical behavior of short concrete columns reinforced with GFRP bars under eccentric loading	761-773
Ronanki, Vidya Sagar / Burkhalter, David I. / Aaleti, Sriram / Song, Wei / Richardson, James A.	Experimental and analytical investigation of end zone cracking in BT-78 girders	503-517
Li, Zheng / Dong, Hanlin / Wang, Xijun / He, Minjuan	Experimental and numerical investigations into seismic performance of timber-steel hybrid structure with supplemental dampers	33-43
Feng, Ran / Sun, Wen / Shen, Chengdong / Zhu, Jihua	Experimental investigation of aluminum square and rectangular beams with circular perforations	613-632
Wang, J. H. / Koizumi, A.	Experimental investigation of buckling collapse of encased liners subjected to external water pressure	44-56
Liu, Jingchen / Yang, Yuanlong / Liu, Jiepeng / Zhou, Xuhong	Experimental investigation of special-shaped concrete-filled steel tubular column to steel beam connections under cyclic loading	68-84
Dinu, Florea / Marginean, Ioan / Dubina, Dan	Experimental testing and numerical modelling of steel moment-frame connections under column loss	861-878
Wang, Ning-Bo / He, Li-Xiang / Ren, Wei-Xin / Huang, Tian-Li	Extraction of influence line through a fitting method from bridge dynamic response induced by a passing vehicle	648-664
Xiang, X. M. / Lu, G. / Li, Z. X. / Lv, Y.	Finite element analysis and experimental study on a bellows joint	584-598
Meng, Dan / Lee, C. K. / Zhang, Y. X.	Flexural and shear behaviours of plain and reinforced polyvinyl alcohol-engineered cementitious composite beams	261-272
Tanarslan, H. M.	Flexural strengthening of RC beams with prefabricated ultra high performance fibre reinforced concrete laminates	337-348
Guo, Yan-Lin / Chen, Hang / Pi, Yong-Lin	In-plane failure mechanisms and strength design of circular steel planar tubular Vierendeel truss arches	488-502
Belejo, Andre / Barbosa, Andre R. / Bento, Rita	Influence of ground motion duration on damage index-based fragility assessment of a plan-asymmetric non-ductile reinforced concrete building	682-703
Lee, Jeong-Hwa / Won, Deok-Hee / Jeong, Youn-Ju / Kim, Seong-Hwan / Kang, Young-Jong	Interfacial shear behavior of a high-strength pile to sleeve grouted connection	704-723
Al-Balhawi, Ali / Zhang, Binsheng	Investigations of elastic vibration periods of reinforced concrete moment-resisting frame systems with various infill walls	173-187
Wang, Wei / Zhang, Yahui / Ouyang, Huajiang	An iterative method for solving the dynamic response of railway vehicle-track coupled systems based on prediction of wheel-rail forces	297-311
Oudah, Fadi / El-Hacha, Raafat	Joint performance in concrete beam-column connections reinforced using SMA smart material	745-760
Trahair, Nick	Lateral buckling of tapered members	518-526
Al-Rifaie, A. / Guan, Z. W. / Jones, S. W. / Wang, Q.	Lateral impact response of end-plate beam-column connections	221-234
Sanders, Emily D. / Ramos, Adeildo S. / Paulino, Glaucio H.	A maximum filter for the ground structure method: An optimization tool to harness multiple structural designs	235-252
Xiao, Q. / Doudak, G. / Mohareb, M.	Numerical and experimental investigation of lateral torsional buckling of wood beams	85-92
Zhang, Changzai / Cheng, Yuansheng / Zhang, Pan / Duan, Xinfeng / Liu, Jun / Li, Yong	Numerical investigation of the response of I-core sandwich panels subjected to combined blast and fragment loading	459-471
Dai, Wentao / Shi, Chen / Tan, Yong / Rojas, Fabian	A numerical solution and evaluation of dynamic stiffness of pile groups and comparison to experimental results	253-260
Zhao, Lufeng / Bi, Kaiming / Hao, Hong / Li, Xiaozhen	Numerical studies on the seismic responses of bridge structures with precast segmental columns	568-583
Chen, Ge-Wei / Omenzetter, Piotr / Beskhyroun, Sherif	Operational modal analysis of an eleven-span concrete bridge subjected to weak ambient excitations	839-860
Tapao, Assanai / Cheerarot, Raungrut	Optimal parameters and performance of artificial bee colony algorithm for minimum cost design of reinforced concrete frames	802-820
Morrison, Machel / Quayyum, Shahriar / Hassan, Tasnim	Performance enhancement of eight bolt extended end-plate moment connections under simulated seismic loading	444-458
Pan, Yuxin / Ventura, Carlos E. / Cheung, Moe M. S.	Performance of highway bridges subjected to blast loads	788-801
Ampatzis, A. T. / Psomiadis, V. G. / Efthymiou, E.	Plastic collapse of hardening spatial aluminium frames: A novel shakedown-based approach	724-744
Moammer, Omid / Dolatshahi, Kiarash M.	Predictive equations for shear link modeling toward collapse	599-612
Allahvirdizadeh, R. / Khanmohammadi, M. / Marefat, M. S.	Probabilistic comparative investigation on introduced performance-based seismic design and assessment criteria	206-220
Truong, Gia Toai / Choi, Kyoung-Kyu / Kim, Hee-Seung	Punching-shear behaviors of RC-column footings with various reinforcement and strengthening details	282-296
Li, Y. G. / Fan, F. / Hong, H. P.	Reliability of lattice dome with and without the effect of using small number of ground motion records in seismic design	381-390
Bojórquez, Juan / Ruiz, Sonia E. / Ellingwood, Bruce / Reyes-Salazar, Alfredo / Bojórquez, Edén	Reliability-based optimal load factors for seismic design of buildings	527-539
Chen, Zhihua / Li, Hongxing / Chen, Aoyi / Yu, Yujie / Wang, Hui	Research on pretensioned modular frame test and simulations	774-787
Guo, Jun-jun / Zhong, Jian / Dang, Xin-zhi / Yuan, Wan-cheng	Seismic performance assessment of a curved bridge equipped with a new type spring restrainer	105-114
Fiorino, Luigi / Macillo, Vincenzo / Landolfo, Raffaele	Shake table tests of a full-scale two-story sheathing-braced cold-formed steel building	633-647
Abdulla, Kurdo F. / Cunningham, Lee S. / Gillie, Martin	Simulating masonry wall behaviour using a simplified micro-model approach	349-365
Wang, Wenjing / Ma, Hua / Li, Zhenbao / Tang, Zhenyun	Size effect in circular concrete-filled steel tubes with different diameter-to-thickness ratios under axial compression	554-567
Stefanidou, Sotiria P. / Sextos, Anastasios G. / Kotsoglou, Anastasios N. / Lesgidis, Nikolaos / Kappos, Andreas J.	Soil-structure interaction effects in analysis of seismic fragility of bridges using an intensity-based ground motion selection procedure	366-380
Nedin, R. / Dudarev, V. / Vatulyan, A.	Some aspects of modeling and identification of inhomogeneous residual stress	391-405
Tong, L. W. / Xu, G. W. / Yang, D. L. / Mashiri, F. R. / Zhao, X. L.	Stress concentration factors in CHS-CFSHS T-joints: Experiments, FE analysis and formulae	406-421
Vu, Ngoc Son / Yu, Bo / Li, Bing	Stress-strain model for confined concrete with corroded transverse reinforcement	472-487
Elchalakani, Mohamed / Ma, Guowei	Tests of glass fibre reinforced polymer rectangular concrete columns subjected to concentric and eccentric axial loading	93-104
Øverli, Jan A.	Towards a better understanding of the ultimate behaviour of LWAC in compression and bending	821-838

About this
data sheet
IssueID
17513
Published on:
06/12/2018
Last updated on:
30/06/2019

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Engineering Structures - November 2017

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Engineering Structures - November 2017

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.