Construction and Building Materials - v. 22, n. 4 (April 2008)

Published:	April 2008

Articles in this Issue

Author(s)	Title	Page(s)
Bitaraf, M. / Mohammadi, S.	Analysis of chloride diffusion in concrete structures for prediction of initiation time of corrosion using a new meshless approach	546-556
Peng, Gai-Fei / Huang, Zhi-Shan	Change in microstructure of hardened cement paste subjected to elevated temperatures	593-599
Mueller, A. / Sokolova, S. N. / Vereshagin, V. I.	Characteristics of lightweight aggregates from primary and recycled raw materials	703-712
Goktepe, A. B. / Sezer, A. / Sezer, G. İ. / Ramyar, K.	Classification of time-dependent unconfined strength of fly ash treated clay	675-683
Kim, Bumjoo / Prezzi, Monica	Compaction characteristics and corrosivity of Indiana class-F fly and bottom ash mixtures	694-702
Felekoğlu, Burak	A comparative study on the performance of sands rich and poor in fines in self-compacting concrete	646-654
Söylev, T. A. / Richardson, M. G.	Corrosion inhibitors for steel in concrete: State-of-the-art report	609-622
Niu, L. / Cheng, Y. F.	Development of innovative coating technology for pipeline operation crossing the permafrost terrain	417-422
Lo, Tommy Y. / Cui, H. Z. / Tang, W. C. / Leung, W. M.	The effect of aggregate absorption on pore area at interfacial zone of lightweight concrete	623-628
Ahmedzade, Perviz / Yilmaz, Mehmet	Effect of polyester resin additive on the properties of asphalt binders and mixtures	481-486
Yazıcı, Halit	The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete	456-462
Trocónis de Rincón, Oladis / Hernández-López, Yolanda / de Valle-Moreno, Angélica / Torres-Acosta, Andrés A. / Barrios, Freddy / Montero, Pablo / Oidor-Salinas, Patricia / Montero, José Rodríguez	Environmental influence on point anodes performance in reinforced concrete	494-503
Roma, Luiz C. / Martello, Luciane S. / Savastano, Holmer	Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers	668-674
Yang, Te-Hsin / Wang, Song-Yung / Lin, Cheng-Jung / Tsai, Ming-Jer	Evaluation of the mechanical properties of Douglas-fir and Japanese cedar lumber and its structural glulam by nondestructive techniques	487-493
Chen, Bing / Liu, Juanyu	Experimental application of mineral admixtures in lightweight concrete with high strength and workability	655-659
Hindi, Riyadh / Turechek, Wesley	Experimental behavior of circular concrete columns under reversed cyclic loading	684-693
Corradi, M. / Tedeschi, C. / Binda, L. / Borri, A.	Experimental evaluation of shear and compression strength of masonry wall before and after reinforcement: Deep repointing	463-472
Chow, W. K. / Leung, C. W. / Zou, Gaowan / Dong, Hui / Gao, Ye	Flame spread over plastic materials in flashover room fires	629-634
Benayoune, A. / Samad, A. A. Abdul / Trikha, D. N. / Ali, A. A. Abang / Ellinna, S. H. M.	Flexural behaviour of pre-cast concrete sandwich composite panel – Experimental and theoretical investigations	580-592
Aydın, Serdar / Yazıcı, Halit / Baradan, Bülent	High temperature resistance of normal strength and autoclaved high strength mortars incorporated polypropylene and steel fibers	504-512
Özçifçi, Ayhan / Özpak, Ahmet Sertan	Impacts of impregnation solutions on the adhesion strength of outer usage varnish coatings	513-520
Özçifçi, Ayhan	Impacts of impregnation with boron compounds on the bonding strength of wood materials	541-545
Li, Jianquan / Li, Guozhong / Yu, Yanzhen	The influence of compound additive on magnesium oxychloride cement/urban refuse floor tile	521-525
Tossavainen, Mia / Lind, Lotta	Leaching results of reactive materials	566-572
Arisoy, Bengi / Wu, Hwai-Chung	Material characteristics of high performance lightweight concrete reinforced with PVA	635-645
Leivo, Virpi / Rantala, Jukka	Moisture behaviour of slab-on-ground structures in operating conditions: Steady-state analysis	526-531
Wardeh, G. / Perrin, B.	Numerical modelling of the behaviour of consolidated porous media exposed to frost action	600-608
Felekoğlu, Burak	Optimization of self-compacting filling grout mixtures for repair purposes	660-667
Topçu, İlker Bekir / Sarıdemir, Mustafa	Prediction of rubberized concrete properties using artificial neural network and fuzzy logic	532-540
Qiao, X. C. / Ng, B. R. / Tyrer, M. / Poon, C. S. / Cheeseman, C. R.	Production of lightweight concrete using incinerator bottom ash	473-480
Poutos, K. H. / Alani, A. M. / Walden, P. J. / Sangha, C. M.	Relative temperature changes within concrete made with recycled glass aggregate	557-565
El Maaddawy, Tamer / Soudki, Khaled	Strengthening of reinforced concrete slabs with mechanically-anchored unbonded FRP system	444-455
Benazzouk, A. / Douzane, O. / Mezreb, K. / Laidoudi, B. / Queneudec, M.	Thermal conductivity of cement composites containing rubber waste particles: Experimental study and modelling	573-579
Apostolopoulos, Charis / Sotiropoulos, Panagiotis	Venetian churches of Lefkada, Greece Construction documentation and seismic behaviour "Virgin Mary of the Strangers"	434-443
Berdahl, Paul / Akbari, Hashem / Levinson, Ronnen / Miller, William A.	Weathering of roofing materials – An overview	423-433

About this
data sheet
IssueID
22420
Published on:
13/12/2018
Last updated on:
13/12/2018

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Construction and Building Materials - v. 22, n. 4 (April 2008)

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Construction and Building Materials - v. 22, n. 4 (April 2008)

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.