Composite Structures - March 2015

Published:	March 2015

Articles in this Issue

Author(s)	Title	Page(s)
Saavedra Flores, E. I. / Dayyani, I. / Ajaj, R. M. / Castro-Triguero, R. / DiazDelaO, F. A. / Das, R. / González Soto, P.	Analysis of cross-laminated timber by computational homogenisation and experimental validation	386-394
Uslu Uysal, Mine / Güven, Uğur	Buckling of functional graded polymeric sandwich panel under different load cases	182-196
Duarte, Isabel / Krstulović-Opara, Lovre / Vesenjak, Matej	Characterisation of aluminium alloy tubes filled with aluminium alloy integral-skin foam under axial compressive loads	154-162
Fathallah, Elsayed / Qi, Hui / Tong, Lili / Helal, Mahmoud	Design optimization of lay-up and composite material system to achieve minimum buoyancy factor for composite elliptical submersible pressure hull	16-26
Nihal Tüzün, F. / Şafak Tunalıoğlu, M.	The effect of finely-divided fillers on the adhesion strengths of epoxy-based adhesives	296-303
Zhang, S. / Dulieu-Barton, J. M. / Thomsen, O. T.	The effect of temperature on the failure modes of polymer foam cored sandwich structures	104-113
Bian, Lichun / Zhao, Huichuan	Elastic properties of a single-walled carbon nanotube under a thermal environment	337-343
Jenson, Daniel / Unnikrishnan, Vinu U.	Energy dissipation of nanocomposite based helmets for blast-induced traumatic brain injury mitigation	211-216
Liu, Longquan / Wang, Hai / Guan, Zhongwei	Experimental and numerical study on the mechanical response of Nomex honeycomb core under transverse loading	304-314
Kalfat, R. / Al-Mahaidi, R.	Finite element investigation into the size effect of bidirectional fibre patch anchors used to enhance the performance of FRP-to-concrete joints	27-36
Murray, Robynne E. / Doman, Darrel A. / Pegg, Michael J.	Finite element modeling and effects of material uncertainties in a composite laminate with bend–twist coupling	362-376
Xin, Libo / Hu, Zhendong	Free vibration of simply supported and multilayered magneto-electro-elastic plates	344-350
Guillaud, N. / Froustey, C. / Dau, F. / Viot, P.	Impact response of thick composite plates under uniaxial tensile preloading	172-181
Radnic, J. / Matešan, D. / Grgić, N. / Baloević, G.	Impact testing of RC slabs strengthened with CFRP strips	90-103
Lee, Chi-Seung / Kim, Jeong-Hyeon / Kim, Seul-Kee / Ryu, Dong-Man / Lee, Jae-Myung	Initial and progressive failure analyses for composite laminates using Puck failure criterion and damage-coupled finite element method	406-419
Shams, Ali / Stark, Alexander / Hoogen, Florian / Hegger, Josef / Schneider, Hartwig	Innovative sandwich structures made of high performance concrete and foamed polyurethane	271-279
Golbahar Haghighi, M. R. / Malekzadeh, P. / Afshari, M.	Inverse estimation of heat flux and pressure in functionally graded cylinders with finite length	1-15
Chen, Mingyang / Lu, Zixing	Load transfer mechanism of the composites incorporating nanohybrid shish-kebab structures	247-257
Zabala, H. / Aretxabaleta, L. / Castillo, G. / Aurrekoetxea, J.	Loading rate dependency on mode I interlaminar fracture toughness of unidirectional and woven carbon fibre epoxy composites	75-82
Xavier, J. / Fernandes, J. R. A. / Frazão, O. / Morais, J. J. L.	Measuring mode I cohesive law of wood bonded joints based on digital image correlation and fibre Bragg grating sensors	83-89
Bednarcyk, Brett A. / Stier, Bertram / Simon, Jaan-W. / Reese, Stefanie / Pineda, Evan J.	Meso- and micro-scale modeling of damage in plain weave composites	258-270
Gigliotti, L. / Pinho, S. T.	Multiple length/time-scale simulation of localized damage in composite structures using a Mesh Superposition Technique	395-405
Fazzolari, Fiorenzo A.	Natural frequencies and critical temperatures of functionally graded sandwich plates subjected to uniform and non-uniform temperature distributions	197-210
Biscaia, Hugo C. / Chastre, Carlos / Viegas, André	A new discrete method to model unidirectional FRP-to-parent material bonded joints subjected to mechanical loads	280-295
Duc, Nguyen Dinh / Thang, Pham Toan / Dao, Nguyen Trong / Tac, Hoang Van	Nonlinear buckling of higher deformable S-FGM thick circular cylindrical shells with metal–ceramic–metal layers surrounded on elastic foundations in thermal environment	134-141
Fathallah, Elsayed / Qi, Hui / Tong, Lili / Helal, Mahmoud	Numerical investigation of the dynamic response of optimized composite elliptical submersible pressure hull subjected to non-contact underwater explosion	121-133
Selvakumaran, Lakshmi / Long, Quan / Prudhomme, Serge / Lubineau, Gilles	On the detectability of transverse cracks in laminated composites using electrical potential change measurements	237-246
Sahmani, S. / Aghdam, M. M. / Bahrami, M.	On the free vibration characteristics of postbuckled third-order shear deformable FGM nanobeams including surface effects	377-385
Eik, Marika / Puttonen, Jari / Herrmann, Heiko	An orthotropic material model for steel fibre reinforced concrete based on the orientation distribution of fibres	324-336
Boscato, Giosue' / Casalegno, Carlo / Russo, Salvatore	Performance of built-up columns made by pultruded FRP material	46-63
Vijaya kumar, R. L. / Bhat, M. R.	Probabilistic stress variation studies on composite single lap joint using Monte Carlo simulation	351-361
Ferreira, Denise / Oller, Eva / Barris, Cristina / Torres, Lluis	Shear strain influence in the service response of FRP reinforced concrete beams	142-153
Zheng, Jinyang / Shi, Jun / Shi, Jianfeng / Zhong, Sijia / Rao, Jing / Li, Guangzhong / Li, Xiang	Short-term burst pressure of polyethylene pipe reinforced by winding steel wires under various temperatures	163-171
Arslan, Eray / Mack, Werner	Shrink fit with solid inclusion and functionally graded hub	217-224
Jing, Zhao / Fan, Xueling / Sun, Qin	Stacking sequence optimization of composite laminates for maximum buckling load using permutation search algorithm	225-236
Chowdhury, Nabil / Chiu, Wing Kong / Wang, John / Chang, Paul	Static and fatigue testing thin riveted, bonded and hybrid carbon fiber double lap joints used in aircraft structures	315-323
Shokrieh, Mahmood M. / Mosalmani, Reza / Omidi, Majid Jamal	A strain-rate dependent micromechanical constitutive model for glass/epoxy composites	37-45
Hu, Haixiao / Li, Shuxin / Wang, Jihui / Zu, Lei	Structural design and experimental investigation on filament wound toroidal pressure vessels	114-120
Maio, L. / Memmolo, V. / Ricci, F. / Boffa, N. D. / Monaco, E. / Pecora, R.	Ultrasonic wave propagation in composite laminates by numerical simulation	64-74

About this
data sheet
IssueID
37867
Published on:
23/10/2020
Last updated on:
09/05/2022

Advertisement

Structurae cooperates with

International Association for Bridge and Structural Engineering (IABSE)

Advertisement

Composite Structures - March 2015

Articles in this Issue

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.

Required Data

Composite Structures - March 2015

Articles in this Issue

You have exceeded your monthly download limit! Structurae Plus subscribers can download 30 media files or data sets per month. Structurae Pro users are limited to 50.

Required Data

You have exceeded your monthly download limit!

Structurae Plus subscribers can download 30 media files or data sets per month.
Structurae Pro users are limited to 50.