Linear displacement and force characterisation of a 3D-printed flexure-based delta actuator

Piezoelectric beams provide a fast, high-force and scalable actuation mechanism that could offer precise motion control to medical microdevices including invasive micromanipulators, catheters and diagnosis tools. Their small displacement range can be addressed by motion amplification mechanisms. In this paper, a piezoelectric-actuated delta-robot actuator is proposed for probe-based confocal laser endomicroscopy (pCLE) microsystems. A prototype is designed and fabricated using three-dimensional (3D) polymer compound printing for a multi-flexure compliant motion amplifier and commercial piezoelectric beams. The flexure material is optimised for maximum linear output motion. The overall robot length is 76 mm and its maximum lateral dimension is 32 mm, with 10 g overall mass, including three piezoelectric beams. An axial motion control range of 0.70 mm and a maximum axial force of 20 mN are demonstrated, at 140 V actuation voltage. The proposed actuator architecture is promising for controlling lens, fibre and micromanipulator components for medical microrobotic applications.

This creative work has been published under the Creative Commons Attribution 4.0 International (CC-BY 4.0) license which allows copying, and redistribution as well as adaptation of the original work provided appropriate credit is given to the original author and the conditions of the license are met.