Jun Wang 
- (2024): Laboratory tests on the traffic-induced cyclic behavior of anisotropically overconsolidated clay under different drainage conditions. In: Soil Dynamics and Earthquake Engineering, v. 182 (July 2024).
- (2023): Mechanical properties and drying shrinkage of graphite tailing-basalt fiber cement mortar. In: Construction and Building Materials, v. 409 (December 2023).
- (2023): Mesoporous Material Modified by Poly-O-Phenylene and Aquatic Plants Cellulose for Effective Removal of Hg(II) Ions. In: Journal of Environmental Engineering (ASCE), v. 149, n. 10 (October 2023).
- (2023): Laboratory Test Study on Pile Jacking Penetration Mechanism Considering Different Diameter and Length Based on Photoelectric Integration Technology. In: Buildings, v. 13, n. 5 (27 April 2023).
- (2023): A literature review on the squirrel-cage fans using in HVAC equipment: Powerful, efficient, and quiet operation. In: Journal of Building Engineering, v. 73 (August 2023).
- (2023): Mechanical properties of short concrete columns reinforced with carbon fiber reinforced composite strips and concrete canvas under axial compression based on acoustic emission. In: Structures, v. 49 (March 2023).
- (2023): Meso-scale computational modeling of the fracture of concrete with complex shaped aggregates under the self-restraint stress. In: Composite Structures, v. 303 (January 2023).
- (2022): Integrating Virtual Reality and Building Information Modeling for Improving Highway Tunnel Emergency Response Training. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2022): A model-based smart contracts system via blockchain technology to reduce delays and conflicts in construction management processes. In: Engineering, Construction and Architectural Management, v. 30, n. 10 (August 2022).
- (2022): Mechanisms of pop-up delamination in laminated composites pierced by the initial pure waterjet in abrasive waterjet machining. In: Composite Structures, v. 297 (October 2022).
- (2022): Marker-free fatigue crack detection and localization by integrating the optical flow and information entropy. In: Structural Health Monitoring, v. 22, n. 2 (May 2022).
- (2021): An Investigation of Bearing Capacity of High-Strength SRC Columns under Eccentric Axial Load. In: Buildings, v. 11, n. 12 (23 November 2021).
- (2022): Life cycle assessment of recycled aggregate concrete on its environmental impacts: A critical review. In: Construction and Building Materials, v. 317 (January 2022).
- (2022): Investigation of the axial compressive behaviour of CFRP-confined circular CFST stub columns with inner latticed steel angles. In: Composite Structures, v. 280 (January 2022).
- (2021): Laboratory tests on the fatigue behavior of damaged reinforced concrete beams under constant‐amplitude fatigue loading. In: Structural Concrete, v. 22, n. 6 (December 2021).
- (2021): Mitigating rock burst hazard in deep coal mines insight from dredging concentrated stress: A case study. In: Tunnelling and Underground Space Technology, v. 115 (September 2021).
- (2021): Laboratory Test of EPB Shield Tunneling in Mixed-Face Conditions. In: International Journal of Geomechanics, v. 21, n. 9 (September 2021).
- (2021): Microscale viscoplastic analysis of unidirectional CFRP composites under the influence of curing process. In: Composite Structures, v. 266 (June 2021).
- (2020): Modeling and Analysis of Thermoelectric Generators for Diesel Engine Exhaust Heat Recovery System. In: Journal of Energy Engineering, v. 146, n. 2 (April 2020).
- (2020): Internal Force of the Anti-slide Pile in Soil Based on the Deep Beam Model. In: KSCE Journal of Civil Engineering, v. 25, n. 3 (December 2020).
- (2019): Low-velocity impact responses and CAI properties of synthetic foam sandwiches. In: Composite Structures, v. 220 (July 2019).
- (2020): Long term cyclic behavior of saturated soft clay under different drainage conditions. In: Soil Dynamics and Earthquake Engineering, v. 139 (December 2020).
- (2014): Mechanical behaviour of concrete filled double skin steel tubular stub columns confined by FRP under axial compression. In: Steel and Composite Structures, v. 17, n. 4 (October 2014).
- (2014): Integrating BIM and augmented reality for interactive architectural visualisation. In: Construction Innovation, v. 14, n. 4 (September 2014).
- (2015): Measurement of small strain shear modulus of clean and natural sands in saturated condition using bender element test. In: Soil Dynamics and Earthquake Engineering, v. 76 (September 2015).
- (2016): Interfacial Behavior of Glass Fiber-Reinforced Polymer Bars Embedded in Concrete with Internal Curing Agents. In: ACI Structural Journal, v. 113, n. 3 (May 2016).
- (2016): Low False Alarm Rate Model for Unsafe-Proximity Detection in Construction. In: Journal of Computing in Civil Engineering, v. 30, n. 2 (March 2016).
- (2016): A linked data system framework for sharing construction defect information using ontologies and BIM environments. In: Automation in Construction, v. 68 (August 2016).
- (2017): Methods for evaluating overconsolidation ratio from piezocone sounding results. In: Underground Space, v. 2, n. 3 (September 2017).
- (2019): Load-transfer mechanism in angle-encased CFST members under axial tension. In: Engineering Structures, v. 178 (January 2019).
Structurae cooperates with
