Somnuk Tangtermsirikul 
- (2024): A hybrid beam system of aramid-fibre-reinforced concrete and high-strength concrete. In: Australian Journal of Structural Engineering, v. 25, n. 3 (February 2024).
- (2023): Prediction equations for corrosion rate of reinforcing steel in cement-fly ash concrete. In: Journal of Structural Integrity and Maintenance, v. 8, n. 2 (3 April 2023).
- (2023): Chloride Penetration Resistance, Electrical Resistivity, and Compressive Strength of Concrete with Calcined Kaolinite Clay, Fly Ash, and Limestone Powder. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 3 (March 2023).
- (2023): Effects of Zinc alloy layer on corrosion and service life of galvanized reinforcing steels in chloride-contaminated concrete. In: Journal of Building Engineering, v. 68 (June 2023).
- (2022): Experimental and numerical investigation of 3D-printed mortar walls under uniform axial compression. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): Field investigation and finite element analysis on expansion and shrinkage strains of expansive concrete structures. In: Construction and Building Materials, v. 360 (December 2022).
- (2022): Numerical study on seismic performance improvement of composite wide beam-column interior joints. In: Journal of Building Engineering, v. 46 (April 2022).
- (2022): Estimation of restrained expansion strain of reinforced expansive concrete considering mixture and curing conditions. In: Construction and Building Materials, v. 322 (March 2022).
- (2023): Investigation of Bottom Ash as a Partial Replacement to Conventional Subbase Soils. In: Proceedings of the Institution of Civil Engineers - Ground Improvement, v. 176, n. 4 (September 2023).
- (2022): Numerical investigation of concrete filled hollow precast composite columns subjected to lateral cyclic loading. In: Engineering Structures, v. 252 (February 2022).
- (2021): Low-Cost Fiber Rope Reinforced Polymer (FRRP) Confinement of Square Columns with Different Corner Radii. In: Buildings, v. 11, n. 8 (27 July 2021).
- (1998): Modeling Of Chloride Ion Movement At The Surface Layer Of Hardened Concrete. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 1998, n. 585 (February 1998).
- (2001): A Model For Predicting Workability Of Fresh Mortar And Concrete. In: 土木学会論文集 (Doboku Gakkai rombunshū), v. 2001, n. 676 (May 2001).
- (2021): Experimental and numerical investigation on seismic performance of a composite wide beam-column interior joint. In: Structures, v. 30 (April 2021).
- (1999): Concrete model code for Asia. report of the working group on materials and construction. Presented at: IABSE Colloquium: Concrete Model Code for Asia - Structurae Concrete: Design, Materials and Construction, and Maintenance, Phuket, Thailand, 17-18 March 1999.
- (1999): Modeling of temperature rise in concrete using fly ash. Presented at: IABSE Colloquium: Concrete Model Code for Asia - Structurae Concrete: Design, Materials and Construction, and Maintenance, Phuket, Thailand, 17-18 March 1999.
- (2020): Investigation of expansive concrete structures through strain monitoring in field structures. In: Asian Journal of Civil Engineering, v. 22, n. 3 (November 2020).
- (2020): Behavior of concrete confined with epoxy bonded fiber ropes under axial load. In: Construction and Building Materials, v. 263 (December 2020).
- (2018): A method to detect lap splice in reinforced concrete using a combination of covermeter and GPR. In: Construction and Building Materials, v. 173 (June 2018).
- (2019): An Experimental Study on Mechanical Properties and Cracking Behaviors of AFRC Used as Functional Material in Hybrid Beams. In: International Journal of Civil Engineering, v. 17, n. 9 (February 2019).
- (2019): Influences of different types of fly ash and confinement on performances of expansive mortars and concretes. In: Construction and Building Materials, v. 209 (June 2019).
- (2009): Effect of mineral admixtures and curing periods on shrinkage and cracking age under restrained condition. In: Construction and Building Materials, v. 23, n. 2 (February 2009).
- (2013): Effect of free lime content on properties of cement–fly ash mixtures. In: Construction and Building Materials, v. 38 (January 2013).
- (2014): Durability and testing of mortar with interground fly ash and limestone cements in sulfate solutions. In: Construction and Building Materials, v. 64 (August 2014).
- (2016): Effect and limitation of free lime content in cement-fly ash mixtures. In: Construction and Building Materials, v. 102 (January 2016).
- (2017): A new method to determine locations of rebars and estimate cover thickness of RC structures using GPR data. In: Construction and Building Materials, v. 140 (June 2017).
- (2003): Numerical Modeling of Steel Corrosion in Concrete Structures due to Chloride Ion, Oxygen and Water Movement. In: Journal of Advanced Concrete Technology, v. 1, n. 2 ( 2003).
- (2011): Carbonation resistance of concrete with crystalline material coating. In: Magazine of Concrete Research, v. 63, n. 8 (August 2011).
- (2011): Damage analysis of an RC column subjected to long-term transient elevated temperature. In: Structure and Infrastructure Engineering, v. 7, n. 12 (December 2011).
- (2018): Effect of initial moisture of wet fly ash on the workability and compressive strength of mortar and concrete. In: Construction and Building Materials, v. 183 (September 2018).
Structurae cooperates with
