Hwasung Roh
- (2021): Shear strength of reinforced concrete columns with five-spiral reinforcement. In: Engineering Structures, v. 233 (April 2021).
- (2015): Seismic Performance of Concrete Columns with Innovative Seven- and Eleven-Spiral Reinforcement. In: ACI Structural Journal, v. 112, n. 5 (September 2015).
- (2019): Development of basic technique to improve seismic response accuracy of tributary area-based lumped-mass stick models. In: Earthquake Engineering and Engineering Vibration, v. 18, n. 1 (January 2019).
- (2009): Spectral and fragility evaluations of retrofitted structures through strength reduction and enhanced damping. In: Earthquake Engineering and Engineering Vibration, v. 8, n. 1 (March 2009).
- (2012): Modeling and cyclic behavior of segmental bridge column connected with shape memory alloy bars. In: Earthquake Engineering and Engineering Vibration, v. 11, n. 3 (September 2012).
- (2013): New lumped-mass-stick model based on modal characteristics of structures: development and application to a nuclear containment building. In: Earthquake Engineering and Engineering Vibration, v. 12, n. 2 (June 2013).
- (2019): Cyclic behavior of squat reinforced concrete walls with openings typical of exterior walls of row houses in Taiwan. In: Engineering Structures, v. 195 (September 2019).
- (2011): Seismic Fragility Evaluation of RC Frame Structures Retrofitted with Controlled Concrete Rocking Column and Damping Technique. In: Journal of Earthquake Engineering, v. 15, n. 7 ( 2011).
- (2016): Tensile behavior of naturally and artificially corroded steel bars. In: Construction and Building Materials, v. 103 (January 2016).
- (2017): Interlaminar shear capacity of thermally damaged GFRP bars under alkaline concrete environment. In: Construction and Building Materials, v. 152 (October 2017).
- (2014): Simplified model and seismic response of integrated nuclear containment system based on frequency adaptive lumped-mass stick modeling approach. In: KSCE Journal of Civil Engineering, v. 19, n. 6 (December 2014).
- (2015): Seismic Performance of Segmental Rocking Columns Connected with NiTi Martensitic SMA Bars. In: Advances in Structural Engineering, v. 18, n. 4 (April 2015).
- (2013): Experimental Fatigue Evaluation of Prestressed Concrete-Filled Steel Tube I-Shaped Bridge Girders. In: Advances in Structural Engineering, v. 16, n. 5 (May 2013).
- (2011): Seismic Response of Adjacent Steel Structures Connected by Passive Device. In: Advances in Structural Engineering, v. 14, n. 3 (June 2011).
- (2010): Modeling and seismic response of structures with concrete rocking columns and viscous dampers. In: Engineering Structures, v. 32, n. 8 (August 2010).
- (2009): Analytical modeling of rocking elements. In: Engineering Structures, v. 31, n. 5 (May 2009).
- (2015): Experimental test and seismic performance of partial precast concrete segmental bridge column with cast-in-place base. In: Engineering Structures, v. 100 (October 2015).
- (2010): Hysteretic behavior of precast segmental bridge piers with superelastic shape memory alloy bars. In: Engineering Structures, v. 32, n. 10 (October 2010).
- (2012): Power spread plasticity model for inelastic analysis of reinforced concrete structures. In: Engineering Structures, v. 39 (June 2012).
- (2014): Effect of yielding level and post-yielding stiffness ratio of ED bars on seismic performance of PT rocking bridge piers. In: Engineering Structures, v. 81 (December 2014).
- (2016): Comparative study of integral abutment bridge structural analysis methods. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 43, n. 4 (April 2016).
- (2010): Nonlinear Static Analysis of Structures with Rocking Columns. In: Journal of Structural Engineering (ASCE), v. 136, n. 5 (May 2010).
Structurae cooperates with
