F. Moreno-Navarro 
- (2022): Understanding the influence of filler type and asphalt binder content on the moisture and fatigue resistance of asphalt mortars. In: Materiales de Construccion, v. 72, n. 348 (October 2022).
- (2022): Development of rail pads from recycled polymers for ballasted railway tracks. In: Construction and Building Materials, v. 337 (June 2022).
- (2021): Smart rail pads for the continuous monitoring of sensored railway tracks: Sensors analysis. In: Automation in Construction, v. 132 (December 2021).
- (2021): Piezoelectric-sensored sustainable pads for smart railway traffic and track state monitoring: Full-scale laboratory tests. In: Construction and Building Materials, v. 301 (September 2021).
- (2017): Mechanical performance assessment of half warm recycled asphalt mixes containing up to 100 % RAP. In: Materiales de Construccion, v. 7, n. 80 (July 2017).
- (2014): Evaluation of the fatigue macro-cracking behavior of crumb rubber modified bituminous mixes. In: Materiales de Construccion, v. 64, n. 315 (September 2014).
- (2017): Evaluation of bituminous sub-ballast manufactured at low temperatures as an alternative for the construction of more sustainable railway structures. In: Materiales de Construccion, v. 7, n. 80 (July 2017).
- (2017): Evaluación del comportamiento mecánico de capas bituminosas ultra delgadas como una adecuada estrategia para la rehabilitación de pavimentos urbanos. In: Materiales de Construccion, v. 7, n. 80 (July 2017).
- (2016): Comparison of the effect of recycled crumb rubber and polymer concentration on the performance of binders for asphalt mixtures. In: Materiales de Construccion, v. 66, n. 323 (August 2016).
- (2017): Analysis of the sensitivity of the impact resonance frequency test as a tool to determine the elastic properties of bituminous materials. In: Materiales de Construccion, v. 7, n. 80 (July 2017).
- (2018): Mechanical and thermal properties of graphene modified asphalt binders. In: Construction and Building Materials, v. 180 (August 2018).
- (2020): Laboratory study on asphalt mixtures for application in port pavements. In: Construction and Building Materials, v. 235 (February 2020).
- (2016): High-Modulus Asphalt Mixtures Modified with Acrylic Fibers for Their Use in Pavements under Severe Climate Conditions. In: Journal of Cold Regions Engineering, v. 30, n. 4 (December 2016).
- (2016): Use of Reclaimed Geomembranes for Modification of Mechanical Performance of Bituminous Binders. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 7 (July 2016).
- (2019): Encoded asphalt materials for the guidance of autonomous vehicles. In: Automation in Construction, v. 99 (March 2019).
- (2013): UGR-FACT test for the study of fatigue cracking in bituminous mixes. In: Construction and Building Materials, v. 43 (June 2013).
- (2014): Reuse of deconstructed tires as anti-reflective cracking mat systems in asphalt pavements. In: Construction and Building Materials, v. 53 (February 2014).
- (2014): The use of additives for the improvement of the mechanical behavior of high modulus asphalt mixes. In: Construction and Building Materials, v. 70 (November 2014).
- (2015): A study into the use of crumb rubber in railway ballast. In: Construction and Building Materials, v. 75 (January 2015).
- (2015): Advanced characterisation of bituminous sub-ballast for its application in railway tracks: The influence of temperature. In: Construction and Building Materials, v. 101 (December 2015).
- (2016): A review of fatigue damage in bituminous mixtures: Understanding the phenomenon from a new perspective. In: Construction and Building Materials, v. 113 (June 2016).
- (2016): Mechanical performance of mechanomutable asphalt binders under cyclic creep and recovery loads. In: Construction and Building Materials, v. 113 (June 2016).
- (2017): Structural analysis of polymer modified bituminous materials in the rehabilitation of light-medium traffic volume roads. In: Construction and Building Materials, v. 156 (December 2017).
- (2018): Full-scale study of Neoballast section for its application in railway tracks: optimization of track design. In: Materials and Structures, v. 51, n. 2 (April 2018).
- (2016): A study into the mechanical performance of different configurations for the railway track section: A laboratory approach. In: Engineering Structures, v. 119 (July 2016).
- (2016): Experimental evaluation of using stainless steel slag to produce mechanomutable asphalt mortars for their use in smart materials. In: Smart Materials and Structures, v. 25, n. 11 (November 2016).
- (2018): Understanding the bitumen ageing phenomenon: A review. In: Construction and Building Materials, v. 192 (December 2018).
- (2018): Mechanical Performance of SMA Mixtures Manufactured with Reclaimed Geomembrane–Modified Binders. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 2 (February 2018).
Structurae cooperates with
