Mohd Rosli Mohd Hasan 
- (2024): Badanie wpływu recyklingowych dodatków z odpadowego oleju silnikowego i oleju roślinnego na właściwości starzonego w laboratorium bitumu. In: Budownictwo i Architektura, v. 23, n. 1 (29 March 2024).
- (2024): Micromechanical modeling for analyzing non-linear behavior of flexible pavements under truck loading. In: Case Studies in Construction Materials, v. 20 (July 2024).
- (2023): The effect of corrosion on the capability of asphalt mortar to induce healing via microwave heating system. In: Construction and Building Materials, v. 407 (December 2023).
- (2023): Effects of diluted methanol and water as foaming agents on the performance of latex foamed warm asphalt mixtures. In: Journal of Traffic and Transportation Engineering (English Edition), v. 10, n. 3 (June 2023).
- (2021): Influence of concentration and packing of filler particles on the stiffening effect and shearing behaviour of asphalt mastic. In: Construction and Building Materials, v. 295 (August 2021).
- (2021): Characteristics of Latex-Modified Bitumen Prepared via Foaming Technique Using Water and Diluted Methanol. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 7 (July 2021).
- (2018): Aggregate Morphology and Internal Structure for Asphalt Concrete: Prestep of Computer-Generated Microstructural Models. In: International Journal of Geomechanics, v. 18, n. 10 (October 2018).
- (2016): Ethanol based foamed asphalt as potential alternative for low emission asphalt technology. In: Journal of Traffic and Transportation Engineering (English Edition), v. 3, n. 2 (April 2016).
- (2016): A hybrid strategy in selecting diverse combinations of innovative sustainable materials for asphalt pavements. In: Journal of Traffic and Transportation Engineering (English Edition), v. 3, n. 2 (April 2016).
- (2019): Comparative study of ethanol foamed asphalt binders and mixtures prepared via manual injection and laboratory foaming device. In: Journal of Traffic and Transportation Engineering (English Edition), v. 6, n. 4 (August 2019).
- (2020): Gradation Design and Performance Evaluation of High Viscosity Asphalt Mixtures. In: Advances in Civil Engineering, v. 2020 (January 2020).
- (2020): Application of diluted methanol to allow the production of latex modified asphalt mixture with lower energy consumption. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Microscopic analysis and mechanical properties of Recycled Paper Mill Sludge modified asphalt mixture using granite and limestone aggregates. In: Construction and Building Materials, v. 243 (May 2020).
- (2018): Determination of optimal mix from the standpoint of short term aging based on asphalt mixture fracture properties using response surface method. In: Construction and Building Materials, v. 179 (August 2018).
- (2018): Comparative study on engineering properties and energy efficiency of asphalt mixes incorporating fly ash and cement. In: Construction and Building Materials, v. 168 (April 2018).
- (2018): An alternative protocol to artificially simulate short-term ageing of binders for selected regional condition. In: Construction and Building Materials, v. 161 (February 2018).
- (2020): Impacts of recycled crumb rubber powder and natural rubber latex on the modified asphalt rheological behaviour, bonding, and resistance to shear. In: Construction and Building Materials, v. 234 (February 2020).
- (2019): Assessments of Potential Service Characteristics of Ethanol and Ethanol-NaHCO3 Foamed WMA Mixtures. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 6 (June 2019).
- (2019): Characterizations of foamed asphalt binders prepared using combinations of physical and chemical foaming agents. In: Construction and Building Materials, v. 204 (April 2019).
- (2012): The effects of initial conditioning and ambient temperatures on abrasion loss and temperature change of porous asphalt. In: Construction and Building Materials, v. 29 (April 2012).
- (2013): The effects of break point location and nominal maximum aggregate size on porous asphalt properties. In: Construction and Building Materials, v. 44 (July 2013).
- (2013): Comparative study on the properties of WMA mixture using foamed admixture and free water system. In: Construction and Building Materials, v. 48 (November 2013).
- (2013): Investigation of induction healing effects on electrically conductive asphalt mastic and asphalt concrete beams through fracture-healing tests. In: Construction and Building Materials, v. 49 (December 2013).
- (2015): Estimation of cumulative energy demand and green house gas emissions of ethanol foamed WMA using life cycle assessment analysis. In: Construction and Building Materials, v. 93 (September 2015).
- (2015): Characterization of the rate of change of rheological properties of nano-modified asphalt. In: Construction and Building Materials, v. 98 (November 2015).
- (2015): Laboratory moisture susceptibility evaluation of WMA under possible field conditions. In: Construction and Building Materials, v. 101 (December 2015).
- (2016): Disruption of air voids continuity based on permeability loss due to mortar creep. In: Construction and Building Materials, v. 116 (July 2016).
- (2017): A comprehensive review of theory, development, and implementation of warm mix asphalt using foaming techniques. In: Construction and Building Materials, v. 152 (October 2017).
- (2018): Effects of coarse aggregate angularity on the microstructure of asphalt mixture. In: Construction and Building Materials, v. 183 (September 2018).
- (2018): Effects of a surfactant-wax based warm additive on high temperature rheological properties of asphalt binders. In: Construction and Building Materials, v. 183 (September 2018).
Structurae cooperates with
