Yukio Hama 
- (2024): Effects of drying and wetting on the microstructure of ordinary portland cement and blast furnace slag cement during drying-wetting cycles. In: Construction and Building Materials, v. 457 (December 2024).
- (2025): Investigation of activated bauxite tailings for application in 3D printed concrete via a modified Anderson and Anderson model. In: Journal of Building Engineering, v. 99 (April 2025).
- (2024): A Proposal of Maturity Function on the Strength Development of Concrete Below the Freezing Point. In: Journal of Advanced Concrete Technology, v. 22, n. 6 (5 June 2024).
- (2023): Study of microstructural changes in blast-furnace cement hardened by repeated dry and wet curing at high temperatures. In: Construction and Building Materials, v. 403 (November 2023).
- (2022): Evaluations of frost and scaling resistance of fly ash concrete in terms of changes in water absorption and pore structure under the accelerated carbonation conditions. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Influence of hydrothermal synthesis conditions and carbonation on physical properties of xonotlite-based lightweight material. In: Construction and Building Materials, v. 321 (February 2022).
- (2022): A study on the change in frost resistance and pore structure of concrete containing blast furnace slag under the carbonation conditions. In: Construction and Building Materials, v. 331 (May 2022).
- (2021): Influence of drying on frost resistance of mortar using a nitrite corrosion inhibitor and paraffin waterproofing agent. In: Construction and Building Materials, v. 283 (May 2021).
- (2022): Effects of the Mineral Composition of Cement on the Temperature Dependency of Strength Development. In: Journal of Advanced Concrete Technology, v. 20, n. 2 (5 February 2022).
- (2021): Effects of frost-damaged reinforced concrete beams on their impact resistance behavior. In: Construction and Building Materials, v. 274 (March 2021).
- (2019): Modeling early age hydration reaction and predicting compressive strength of cement paste mixed with expansive additives. In: Construction and Building Materials, v. 223 (October 2019).
- (2013): Influence of aggregate materials characteristics on the drying shrinkage properties of mortar and concrete. In: Construction and Building Materials, v. 49 (December 2013).
- (2015): Drying shrinkage and microstructure characteristics of mortar incorporating ground granulated blast furnace slag and shrinkage reducing admixture. In: Construction and Building Materials, v. 93 (September 2015).
- (2016): Compressive strength, resistance to chloride-ion penetration and freezing/thawing of slag-replaced concrete and cementless slag concrete containing desulfurization slag activator. In: Construction and Building Materials, v. 128 (December 2016).
- (2017): Compressive strength development and durability of an environmental load-reduction material manufactured using circulating fluidized bed ash and blast-furnace slag. In: Construction and Building Materials, v. 146 (August 2017).
- (2017): Method for determining early-age frost damage of concrete by using air-permeability index and influence of early-age frost damage on concrete durability. In: Construction and Building Materials, v. 153 (October 2017).
- (2017): Effect of Limestone Powder and Gypsum on the Compressive Strength Mixture Design of Blast Furnace Slag Blended Cement Mortar. In: Journal of Advanced Concrete Technology, v. 15, n. 2 ( 2017).
- (2012): Experimental Investigation on Reaction Rate and Self-healing Ability in Fly Ash Blended Cement Mixtures. In: Journal of Advanced Concrete Technology, v. 10, n. 7 ( 2012).
- (2007): Nano-structural Changes of C-S-H in Hardened Cement Paste during Drying at 50°C. In: Journal of Advanced Concrete Technology, v. 5, n. 3 ( 2007).
- (2017): Evaluation of the combined deterioration by freeze–thaw and carbonation of mortar incorporating BFS, limestone powder and calcium sulfate. In: Materials and Structures, v. 50, n. 3 (June 2017).
- (2018): Influence of Silicone Oil on Durability of Portland Blast Furnace Slag Cement Mortar. In: Journal of Advanced Concrete Technology, v. 16, n. 2 ( 2018).
- (2018): Effect of 10-Year Outdoor Exposure and Curing Conditions on the Pore Structure Characteristics of Hardened Cement Mortar. In: Journal of Advanced Concrete Technology, v. 16, n. 9 (September 2018).
Structurae cooperates with
