Arul Arulrajah 
- (2024): Asphalt concrete improved by concentrated rubber latex and prevulcanized rubber latex – Performance and cost analysis. In: Case Studies in Construction Materials, v. 21 (December 2024).
- (2023): Compressive Strength and Morphology of Rigid Polyurethane Foam for Road Applications. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (December 2023).
- (2023): Effect of wetting and drying cycles on mechanical strength of cement-natural rubber latex stabilized recycled concrete aggregate. In: Construction and Building Materials, v. 394 (August 2023).
- (2023): Application of Microbially Induced Calcite Precipitation (MICP) technology in construction materials: A comprehensive review of waste stream contributions. In: Construction and Building Materials, v. 388 (July 2023).
- (2023): Alkali activation of recycled concrete and aluminum salt slag aggregates for semi-rigid column inclusions. In: Construction and Building Materials, v. 366 (February 2023).
- (2021): Crushing behavior of recycled waste materials: Experimental analysis and DEM simulation. In: Construction and Building Materials, v. 299 (September 2021).
- (2019): Collapse and Swell of Lime Stabilized Expansive Clays in Void Ratio–Moisture Ratio–Net Stress Space. In: International Journal of Geomechanics, v. 19, n. 9 (September 2019).
- (2020): Effect of Swell–Shrink Cycles on Volumetric Behavior of Compacted Expansive Clay Stabilized Using Lime. In: International Journal of Geomechanics, v. 20, n. 11 (November 2020).
- (2017): Effect of lime stabilization on the mechanical and micro-scale properties of recycled demolition materials. In: Sustainable Cities and Society, v. 30 (April 2017).
- (2018): Cutter-disc consumption during earth pressure balance tunnelling in mixed strata. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 171, n. 4 (August 2018).
- (2021): Effect of Curing Time on the Performance of Fly Ash Geopolymer-Stabilized RAP Bases. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 3 (March 2021).
- (2021): Dynamic characterization of recycled glass-recycled concrete blends using experimental analysis and artificial neural network modeling. In: Soil Dynamics and Earthquake Engineering, v. 142 (March 2021).
- (2020): Development of genetic-based models for predicting the resilient modulus of cohesive pavement subgrade soils. In: Soils and Foundations, v. 60, n. 2 (April 2020).
- (2019): Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials. In: Soils and Foundations, v. 59, n. 2 (April 2019).
- (2018): Durability against wetting-drying cycles for cement-stabilized reclaimed asphalt pavement blended with crushed rock. In: Soils and Foundations, v. 58, n. 2 (April 2018).
- (2020): Compressibility and strength development of geopolymer stabilized columns cured under stress. In: Soils and Foundations, v. 60, n. 5 (October 2020).
- (2021): Development of a Unique Test Apparatus to Conduct Axial and Transverse Pullout Testing on Geogrid Reinforcements. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (January 2021).
- (2020): Analysis of a tunnel failure caused by leakage of the shield tail seal system. In: Underground Space, v. 5, n. 2 (June 2020).
- (2019): Digital Image Correlation Technique for Measurement of Surface Strains in Reinforced Asphalt Concrete Beams under Fatigue Loading. In: Journal of Materials in Civil Engineering (ASCE), v. 31, n. 8 (August 2019).
- (2016): Durability against Wetting–Drying Cycles of Water Treatment Sludge–Fly Ash Geopolymer and Water Treatment Sludge–Cement and Silty Clay–Cement Systems. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 1 (January 2016).
- (2014): Densification of Land Reclamation Sands by Deep Vibratory Compaction Techniques. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 8 (August 2014).
- (2014): Calcium carbide residue: Alkaline activator for clay–fly ash geopolymer. In: Construction and Building Materials, v. 69 (October 2014).
- (2015): Durability against wetting–drying cycles of sustainable Lightweight Cellular Cemented construction material comprising clay and fly ash wastes. In: Construction and Building Materials, v. 77 (February 2015).
- (2015): Compressive strength development in fly ash geopolymer masonry units manufactured from water treatment sludge. In: Construction and Building Materials, v. 82 (May 2015).
- (2016): Concrete wedge and coarse sand coating shear connection system in GFRP concrete composite deck. In: Construction and Building Materials, v. 114 (July 2016).
- (2017): Effect of wetting–drying cycles on compressive strength and microstructure of recycled asphalt pavement – Fly ash geopolymer. In: Construction and Building Materials, v. 144 (July 2017).
- (2017): Cement kiln dust and fly ash blends as an alternative binder for the stabilization of demolition aggregates. In: Construction and Building Materials, v. 145 (August 2017).
- (2017): Effect of lime kiln dust as an alternative binder in the stabilization of construction and demolition materials. In: Construction and Building Materials, v. 152 (October 2017).
- (2018): Alkali-activation of fly ash and cement kiln dust mixtures for stabilization of demolition aggregates. In: Construction and Building Materials, v. 186 (October 2018).
- (2018): Compressive and Flexural Strength of Polyvinyl Alcohol–Modified Pavement Concrete Using Recycled Concrete Aggregates. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 4 (April 2018).
Structurae cooperates with
