Riadh Al-Mahaidi 
- (2000): Load Distribution and Shear Strength Evaluation of an Old Concrete T-Beam Bridge. In: Transportation Research Record: Journal of the Transportation Research Board, v. 1696, n. 1 (January 2000).
- (2023): Flexural improvement of reinforced concrete beams strengthened with self-prestressing shape memory alloys. In: Advances in Structural Engineering, v. 27, n. 2 (11 December 2023).
- (2018): Flat Prestressed Unbonded Reinforcement (FPUR) System for Strengthening of Steel I-Beams. Presented at: Ninth International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, 9-13 July 2018, Melbourne, Australia.
- (2022): Finite element modelling of RC slabs strengthened against punching shear with L-CFRP laminates. In: Australian Journal of Structural Engineering, v. 23, n. 4 (June 2022).
- (2021): Investigation into the fatigue life of FRP strengthened concrete structures. In: Materials and Structures, v. 55, n. 1 (18 December 2021).
- (2022): Externally Bonded CFRP for Flexural Strengthening of RC Beams with Different Levels of Soffit Curvature. In: Journal of Composites for Construction, v. 26, n. 1 (February 2022).
- (2021): Improved Fixed Strut-Angle Model for Analysis of Reinforced Concrete Panel Elements under Monotonic Shear Loads. In: Journal of Structural Engineering (ASCE), v. 147, n. 7 (July 2021).
- (2021): Finite element simulation of unbonded retrofitting system for a steel bridge in Australia. In: Australian Journal of Structural Engineering, v. 22, n. 1 (January 2021).
- (2021): Experimental Investigation of Curved-Soffit RC Bridge Girders Strengthened in Flexure Using CFRP Composites. In: Journal of Bridge Engineering (ASCE), v. 26, n. 4 (April 2021).
- (2017): Fatigue performance of NSM CFRP strips embedded in concrete using innovative high-strength self-compacting cementitious adhesive (IHSSC-CA) made with graphene oxide. In: Composite Structures, v. 163 (March 2017).
- (2016): Fatigue performance of NSM CFRP strips embedded in concrete using epoxy adhesive. In: Composite Structures, v. 154 (October 2016).
- (2013): Finite element modelling of CFRP/steel double strap joints subjected to dynamic tensile loadings. In: Composite Structures, v. 99 (May 2013).
- (2012): Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography. In: Composite Structures, v. 94, n. 2 (January 2012).
- (2010): Fe modelling of CFRP-concrete interface subjected to cyclic temperature, humidity and mechanical stress. In: Composite Structures, v. 92, n. 4 (March 2010).
- (2009): Experimental study of fatigue crack growth behaviour in adhesively reinforced steel structures. In: Composite Structures, v. 90, n. 1 (September 2009).
- (2020): Hybrid simulation of bridges constructed with concrete-filled steel tube columns subjected to horizontal and vertical ground motions. In: Bulletin of Earthquake Engineering, v. 18, n. 9 (May 2020).
- (2016): Exterior post-tensioned band beam to column connections under earthquake loading. In: Australian Journal of Structural Engineering, v. 17, n. 4 (December 2016).
- (2018): Experimental study on crack propagation of CFRP-strengthened RC beams subjected to torsion. In: Australian Journal of Structural Engineering, v. 19, n. 4 (October 2018).
- (2019): Linking seismic resilience into sustainability assessment of limited-ductility RC buildings. In: Engineering Structures, v. 188 (June 2019).
- (2006): Experimental Investigation on Torsional Behavior of Solid and Box-Section RC Beams Strengthened with CFRP Using Photogrammetry. In: Journal of Composites for Construction, v. 10, n. 4 (August 2006).
- (2012): Experimental investigation on the thermal and mechanical properties of nanoclay-modified adhesives used for bonding CFRP to concrete substrates. In: Construction and Building Materials, v. 28 (March 2012).
- (2017): Fatigue performance of near-surface mounted CFRP strips embedded in concrete girders using cementitious adhesive made with graphene oxide. In: Construction and Building Materials, v. 148 (September 2017).
- (2017): An experimental investigation of the behaviour of heat-damaged RC columns confined with CFRP fabrics using photogrammetry. In: Materials and Structures, v. 50, n. 1 (February 2017).
- (2014): FRP Strengthening of Structures Subject to Fatigue, Impact and Environmental Loading. In: Advances in Structural Engineering, v. 17, n. 12 (December 2014).
- (2012): Fatigue Tests of Cracked Steel Plates Strengthened with UHM CFRP Plates. In: Advances in Structural Engineering, v. 15, n. 10 (October 2012).
- (2004): Finite Element Analysis (FEA) of Fabricated Square and Triangular Section Stub Columns Utilizing Very High Strength Steel Tubes. In: Advances in Structural Engineering, v. 7, n. 5 (October 2004).
- (2006): Flange Strain Measurement in Shear Critical RC T-Beams. In: Advances in Structural Engineering, v. 9, n. 4 (August 2006).
- (2017): An innovative I-beam to hybrid fabricated column connection: Experimental investigation. In: Engineering Structures, v. 148 (October 2017).
- (2002): Experimental study on the effect of flange geometry on the shear strength of reinforced concrete T-beams subjected to concentrated loads. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 29, n. 6 (December 2002).
- (2018): Fatigue life improvement of steel structures using self-prestressing CFRP/SMA hybrid composite patches. In: Engineering Structures, v. 174 (November 2018).
Structurae cooperates with
