Rashid K. Abu Al-Rub 
- (2024): Influence of carbon nanotubes on printing quality and mechanical properties of 3D printed cementitious materials. In: Developments in the Built Environment, v. 18 (April 2024).
- (2011): Meso-scale computational modeling of the plastic-damage response of cementitious composites. In: Cement and Concrete Research, v. 41, n. 3 (March 2011).
- (2012): Mechanical Properties of Nanocomposite Cement Incorporating Surface-Treated and Untreated Carbon Nanotubes and Carbon Nanofibers. In: Journal of Nanomechanics and Micromechanics, v. 2, n. 1 (March 2012).
- (2022): Quantification of Plasticity and Damage in Berea Sandstone through Monotonic and Cyclic Triaxial Loading under High-Confinement Pressures. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 7 (July 2022).
- (2021): Quasi-static and dynamic compressive behaviour of sheet TPMS cellular structures. In: Composite Structures, v. 266 (June 2021).
- (2017): Mechanical properties of periodic interpenetrating phase composites with novel architected microstructures. In: Composite Structures, v. 176 (September 2017).
- (2015): Micromechanical finite element predictions of a reduced coefficient of thermal expansion for 3D periodic architectured interpenetrating phase composites. In: Composite Structures, v. 133 (December 2015).
- (2020): Effective Anisotropic Elastic and Plastic Yield Properties of Periodic Foams Derived from Triply Periodic Schoen’s I-WP Minimal Surface. In: Journal of Engineering Mechanics (ASCE), v. 146, n. 5 (May 2020).
- (2015): Constitutive Modeling of the Coupled Moisture-Mechanical Response of Particulate Composite Materials with Application to Asphalt Concrete. In: Journal of Engineering Mechanics (ASCE), v. 141, n. 2 (February 2015).
- (2013): Cyclic Hardening-Relaxation Viscoplasticity Model for Asphalt Concrete Materials. In: Journal of Engineering Mechanics (ASCE), v. 139, n. 7 (July 2013).
- (2018): Modeling Time and Frequency Domain Viscoelastic Behavior of Architectured Foams. In: Journal of Engineering Mechanics (ASCE), v. 144, n. 6 (June 2018).
- (2014): Three-Dimensional Microstructural Modeling Framework for Dense-Graded Asphalt Concrete Using a Coupled Viscoelastic, Viscoplastic, and Viscodamage Model. In: Journal of Materials in Civil Engineering (ASCE), v. 26, n. 4 (April 2014).
- (2011): Three-Dimensional Simulations of Asphalt Pavement Permanent Deformation Using a Nonlinear Viscoelastic and Viscoplastic Model. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 1 (January 2011).
- (2011): Carbon Nanotubes and Carbon Nanofibers for Enhancing the Mechanical Properties of Nanocomposite Cementitious Materials. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 7 (July 2011).
- (2012): Three-dimensional microstructural modeling of asphalt concrete using a unified viscoelastic–viscoplastic–viscodamage model. In: Construction and Building Materials, v. 28 (March 2012).
- (2012): On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites. In: Construction and Building Materials, v. 35 (October 2012).
- (2013): Mechanistic-based constitutive modeling of oxidative aging in aging-susceptible materials and its effect on the damage potential of asphalt concrete. In: Construction and Building Materials, v. 41 (April 2013).
- (2013): Effect of confinement pressure on the nonlinear-viscoelastic response of asphalt concrete at high temperatures. In: Construction and Building Materials, v. 47 (October 2013).
- (2016): Effect of mixing duration on flexural strength of multi walled carbon nanotubes cementitious composites. In: Construction and Building Materials, v. 126 (November 2016).
- (2018): Effect of the Realistic Tire Contact Pressure on the Rutting Performance of Asphaltic Concrete Pavements. In: KSCE Journal of Civil Engineering, v. 22, n. 6 (May 2018).
Structurae cooperates with
