0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Real-time Remote Monitoring System Based on the Large Deformation Cable with Constant Resistance for Landslide Disaster and Its Application

Autor(en):



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: The Open Civil Engineering Journal, , n. 1, v. 9
Seite(n): 504-509
DOI: 10.2174/1874149501509010504
Abstrakt:

It is meaningful for researching on monitoring and forecasting technology of slope stability to prevent landslide disasters, especially in the water system fields. Based on the mechanical principle of interaction among sliding mass, sliding bed and monitoring cable, a new type of energy absorbing cable (called Large Deformation Cable with Constant Resistance) which can have 2000mm deformation with constant pull load of 850kN is developed. The mechanical principle of relative movement between sliding mass and sliding bed is proposed, and the multi-factor monitoring is transformed into single landslide mechanical monitoring. The relationship between sliding force of slope and pretightening force of monitoring cable is set up. According to the physical model experiment of landslide, the sliding force at the potential slip surface will change continually before the landslide. When the sliding force is greater than the shear resistance at the potential slip surface, the landslide will take place, which means the variation of sliding force at the potential slip surface will be ahead of displacement on the ground of slope. Consequently, monitoring the variation of sliding force at the potential slip surface is better than that of the displacement. Based on above principle and experiment, the system of real-time remote monitoring and forecasting for landslide disasters based on the large deformation cable with constant resistance is developed, which can realize the real-time remote monitoring warning of sliding force. Several landslides have been successfully predicted.

Copyright: © 2016 Zhigang Tao et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10175590
  • Veröffentlicht am:
    30.12.2018
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine