• DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke


Numerical Modeling of Masonry Infilled Reinforced Concrete Building during Construction Stages Using ABAQUS Software


Medium: Fachartikel
Sprache(n): en 
Veröffentlicht in: Buildings, , n. 8, v. 9
Seite(n): 181
DOI: 10.3390/buildings9080181

The effects of seismic actions on reinforced concrete (RC) structures are strongly influenced by the dynamic behavior of their materials. It is crucial to find a simple definition of the natural frequencies of reinforced concrete buildings, particularly in relation to both principal and secondary elements constructing the reinforced concrete building type. This paper firstly presents a comparison with the ambient vibration surveys. An analysis model of different stages of construction of the reinforced concrete masonry wall was compared using the finite element software. In the second step, structural responses of the model were investigated by means of static analysis. Three main types were examined: Bare frame for one, two and three storeys; brick-walled; and coated cases. Modal analysis is carried out by ABAQUS software starting from the deformed building, to provide the natural frequencies and mode shapes. For the natural frequencies, a good agreement is obtained between analytical and experimental results. Furthermore, the comparison results between different cases show that the application of the plaster work increases the lateral stiffness and has significant effects on the dynamic response of the buildings.

Copyright: © 2019 by the authors; licensee MDPI, Basel, Switzerland.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
  • Reference-ID
  • Veröffentlicht am:
  • Geändert am: