Fatigue Damage and Reliability Assessment of Wind Turbine Structure During Service Utilizing Real-Time Monitoring Data

Under the action of wind load, a wind turbine tower will produce alternating stress, which leads to fatigue failure. According to the mean wind speed at the wind turbine impeller collected from the SCADA system, the mean wind speed of the simulation point is calculated by using the wind speed exponential model formula. Davenport spectra are used to simulate the pulsating wind speed time series. The wind spectrum is obtained using the harmonic superposition method. Subsequently, the wind speed time series and wind load time series at the simulation point are calculated. Structural modeling of a 5 MW wind turbine tower is performed in ABAQUS 2021. The modal shape and natural frequency are obtained by modal analysis to verify the rationality of the model. Subsequently, wind loads are applied to the model, and structural stress time history is obtained by transient modal dynamics analysis. The stress time history of the maximum stress area of the tower structure is extracted, and the rain flow counting method is applied to it to obtain the stress spectrum. The Weibull distribution of the stress spectrum is fitted, the mean and variance of the total damage in one day are calculated, and the fatigue reliability analysis of the maximum stress area of the tower structure is carried out. And the nonlinear fatigue cumulative damage analysis of the region is carried out. This work has implications for fatigue reliability studies for approximate operating conditions.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.