Caijun Shi 
- : Influence of the Multiple Element Ions contained in Seawater and Sea Sand on the Freeze-Thaw Resistance of Cementitious Materials. In: Journal of Building Engineering.
- (2024): Evaluation of tensile failure behavior of ultra high performance concrete under double-edge wedge splitting and direct tension loadings. In: Journal of Building Engineering, v. 90 (August 2024).
- (2024): Further hydration hardening behavior of CO2-cured sodium-doped calcium silicate compacts. In: Case Studies in Construction Materials, v. 20 (Juli 2024).
- (2024): Evaluation on steel corrosion risk of seawater sea sand concrete with low water-to-binder ratio by electrochemical measurement. In: Construction and Building Materials, v. 417 (Februar 2024).
- (2024): The influence of chlorides on corrosion behavior of carbon steel in slag-based geopolymer pore solution. In: Journal of Building Engineering, v. 85 (Mai 2024).
- (2024): Experimental and analytical studies on residual flexural behaviour of reinforced alkali-activated slag-based concrete beams after exposure to fire. In: Engineering Structures, v. 298 (Januar 2024).
- (2020): Experimental investigation and prediction of elastic modulus of ultra-high performance concrete (UHPC) based on its composition. In: Cement and Concrete Research, v. 138 (Dezember 2020).
- (2022): Hydration-hardening properties of low-clinker composite cement incorporating carbonated waste sintering red mud and metakaolin. In: Construction and Building Materials, v. 354 (November 2022).
- (2022): Experimental study on creep of short performance-based alkali-activated concrete column. In: Journal of Building Engineering, v. 60 (November 2022).
- (2022): Impact of micro characteristics on the formation of high-strength Class F fly ash-based geopolymers cured at ambient conditions. In: Construction and Building Materials, v. 352 (Oktober 2022).
- (2021): Flow behavior of cementitious-like suspension with nano-Fe3O4 particles under external magnetic field. In: Materials and Structures, v. 54, n. 6 (20 November 2021).
- (2021): Influence of pumping on the resistivity evolution of high-strength concrete and its relation to the rheology. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Factors affecting the effectiveness of internal curing: A review. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2021): Experimental study and analytical modeling on tensile performance of basalt textile reinforced concrete. In: Construction and Building Materials, v. 267 (Januar 2021).
- (2021): Flexural behavior of alkali-activated slag-based concrete beams. In: Engineering Structures, v. 229 (Februar 2021).
- (2020): Expansion behavior and microstructure change of alkali-activated slag grouting material in carbonate environment. In: Construction and Building Materials, v. 262 (November 2020).
- (2020): Expansion behavior and microstructure change of alkali-activated slag grouting material in sulfate environment. In: Construction and Building Materials, v. 260 (November 2020).
- (2020): Flexural Performance of Basalt Textile-Reinforced Concrete with Pretension and Short Fibers. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 3 (März 2020).
- (2018): Improvement of properties of architectural mortars prepared with 100% recycled glass by CO2 curing. In: Construction and Building Materials, v. 179 (August 2018).
- (2018): Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures. In: Construction and Building Materials, v. 175 (Juni 2018).
- (2018): Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads. In: Construction and Building Materials, v. 169 (April 2018).
- (2020): Influence of the structures of polycarboxylate superplasticizer on its performance in cement-based materials-A review. In: Construction and Building Materials, v. 233 (Februar 2020).
- (2019): A feasible method for measuring the buildability of fresh 3D printing mortar. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2019): Impact of different climates on the resistance of concrete to natural carbonation. In: Construction and Building Materials, v. 216 (August 2019).
- (2016): Factorial Design Method for Designing Ternary Composite Cements to Mitigate ASR Expansion. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 9 (September 2016).
- (2016): Influence of Nanolimestone on the Hydration, Mechanical Strength, and Autogenous Shrinkage of Ultrahigh-Performance Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 1 (Januar 2016).
- (2014): Experimental study on CO2 curing for enhancement of recycled aggregate properties. In: Construction and Building Materials, v. 67 (September 2014).
- (2015): Influence of surface modification on physical and ultraviolet aging resistance of bitumen containing inorganic nanoparticles. In: Construction and Building Materials, v. 98 (November 2015).
- (2015): Influence of carbonated recycled concrete aggregate on properties of cement mortar. In: Construction and Building Materials, v. 98 (November 2015).
- (2018): Influences of shear-mixing rate and fly ash on rheological behavior of cement pastes under continuous mixing. In: Construction and Building Materials, v. 188 (November 2018).
Structurae kooperiert mit
