Pier Paolo Rossi 
- (2024): Calibration of Ibarra-Krawinkler model for steel members with cold-formed hollow cross-section. In: Journal of Constructional Steel Research, v. 215 (April 2024).
- (2023): Prediction of the cyclic rotation capacity of steel members with cold‐formed hollow cross‐section. In: ce/papers, v. 6, n. 3-4 (September 2023).
- (2023): Experimental application of the Italian guidelines for the risk classification and management and for the safety evaluation of existing bridges. In: Structures, v. 58 (Dezember 2023).
- (2023): Prediction of the monotonic load–displacement curve of slender RC beams with corroded transverse and longitudinal reinforcements. In: Structural Concrete, v. 24, n. 5 (Oktober 2023).
- (2017): A design procedure for suspended zipper-braced frames in the framework of Eurocode 8. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 12 (10 Oktober 2017).
- (2023): Influence of uncertainties on the seismic performance of steel moment resisting frames. In: Journal of Constructional Steel Research, v. 205 (Juni 2023).
- (2022): Calibration of the Length of the Plastic Hinge for Numerical Models of Reinforced Concrete Members. In: Buildings, v. 12, n. 10 (20 September 2022).
- (2022): Design of Steel Exoskeleton Equipped with BRBs for Seismic Upgrading of RC Frames. In: The Open Construction and Building Technology Journal, v. 16, n. 1 (3 Februar 2022).
- (2022): Overstrength and deformation capacity of steel members with cold-formed hollow cross-section. In: Journal of Constructional Steel Research, v. 191 (April 2022).
- (1983): Diagnostic analysis of masonry buildings. Vorgetragen bei: IABSE Symposium: Strengthening of building structures - Diagnosis and Therapy = Renforcement des structures de bâtiment - Diagnostic et thérapie = Verstärkung von Bauwerken - Diagnose und Behandlung, Venice, Italy, 1983.
- (2019): On the fibre modelling of beams in RC framed buildings with rigid diaphragm. In: Bulletin of Earthquake Engineering, v. 18, n. 1 (Oktober 2019).
- (2015): Critical review of the EC8 design provisions for buildings with eccentric braces. In: Earthquakes and Structures, v. 8, n. 6 (Juni 2015).
- (2019): A new macromodel for the assessment of the seismic response of infilled RC frames. In: Earthquake Engineering and Structural Dynamics, v. 48, n. 7 (Juni 2019).
- (2017): multi-performance design method for seismic upgrading of existing RC frames by BRBs. In: Earthquake Engineering and Structural Dynamics, v. 46, n. 7 (Juni 2017).
- (2014): An accurate strength amplification factor for the design of SDOF systems withP-Δ effects. In: Earthquake Engineering and Structural Dynamics, v. 43, n. 4 (März 2014).
- (2007): A design procedure for tied braced frames. In: Earthquake Engineering and Structural Dynamics, v. 36, n. 14 (November 2007).
- (2015): Monitoring of Two Great Venetian Cathedrals: San Marco and Santa Maria Gloriosa Dei Frari. In: International Journal of Architectural Heritage, v. 9, n. 1 (August 2015).
- (2001): Influence of bi-directional ground motions on the inelastic response of one-storey in-plan irregular systems. In: Engineering Structures, v. 23, n. 6 (Juni 2001).
- (2016): Influence of modelling of steel link beams on the seismic response of EBFs. In: Engineering Structures, v. 127 (November 2016).
- (2000): Formulation of design eccentricity to reduce ductility demand in asymmetric buildings. In: Engineering Structures, v. 22, n. 7 (Juli 2000).
- (2015): Modelling of steel link beams of short, intermediate or long length. In: Engineering Structures, v. 84 (Februar 2015).
- (2015): Predicting displacement demand of multi-storey asymmetric buildings by nonlinear static analysis and corrective eccentricities. In: Engineering Structures, v. 99 (September 2015).
- (2013): An analytical method for the evaluation of the in-plan irregularity of non-regularly asymmetric buildings. In: Bulletin of Earthquake Engineering, v. 11, n. 5 (März 2013).
- (2017): Generalized corrective eccentricities for nonlinear static analysis of buildings with framed or braced structure. In: Bulletin of Earthquake Engineering, v. 15, n. 11 (Mai 2017).
- (2013): Comparison of nonlinear static methods for the assessment of asymmetric buildings. In: Bulletin of Earthquake Engineering, v. 11, n. 6 (Juni 2013).
- (2006): Effect of Overstrength on the Seismic Behaviour of Multi-Storey Regularly Asymmetric Buildings. In: Bulletin of Earthquake Engineering, v. 4, n. 1 (Februar 2006).
- (2017): 11.46: The design of suspended zipper braced frames in the framework of Eurocode 8. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2017): 11.23: Influence of the uniaxial material model of steel on the seismic response of steel structures. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2017): 11.17: Seismic retrofitting of concentrically braced frames by rocking walls and viscous dampers. In: ce/papers, v. 1, n. 2-3 (September 2017).
- (2018): design procedure for pin-supported rocking buckling-restrained braced frames. In: Earthquake Engineering and Structural Dynamics, v. 47, n. 14 (November 2018).
Structurae kooperiert mit
