Viktor Mechtcherine 
- (2024): The Impact of Production Techniques on Pore Size Distribution in High-Strength Foam Concrete. In: Infrastructures, v. 10, n. 1 (25 Dezember 2024).
- (2024): Materialsparende Betondecke aus 3D‐gedruckten Verriegelungsblöcken. In: Beton- und Stahlbetonbau, v. 119, n. 12 (Dezember 2024).
- (2024): Fließfertigung von variablen gekrümmten Modulen für dünnwandige Schalenkonstruktionen aus Beton. In: Beton- und Stahlbetonbau, v. 119, n. 11 (November 2024).
- (2025): Hybrid mineral-bonded protective layers for enhanced self-centering capacity of reinforced concrete beams subjected to blast. In: Engineering Structures, v. 322 (Januar 2025).
- (2024): Multi-method characterization of 50-year-old mass concrete from the nuclear power plant Unterweser in Germany: A Forensic Approach. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Influence of electrophoretic deposition of micro- or nanosized silica particles on the microstructure of carbon fibers and their bond behavior with cementitious matrices. In: Materials and Structures, v. 57, n. 5 (16 Mai 2024).
- (2024): In-process textile reinforcement method for 3D concrete printing and its structural performance. In: Engineering Structures, v. 314 (September 2024).
- (2024): Influence of curing temperature and pressure on the mechanical and microstructural development of metakaolin-based geopolymers. In: Construction and Building Materials, v. 424 (April 2024).
- (2023): Guidelines for using superabsorbent polymers (SAP) in concrete construction. In: RILEM Technical Letters, v. 8 (August 2023).
- (2023): Mastering the rheology of fresh concrete: New knowledge from a DFG priority program SPP 2005. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): Mineral-impregnated carbon-fiber based reinforcing grids as thermal energy harvesters: A proof-of-concept study towards multifunctional building materials. In: Energy and Buildings, v. 298 (November 2023).
- (2023): Interfacial properties of high-strength, limestone-calcined clay cement (LC3) matrix and PE fibers, surface-modified using dopamine and tannic acid. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2016): Impact of the molecular architecture of polycarboxylate superplasticizers on the dispersion of multi-walled carbon nanotubes in aqueous phase. In: Journal of Materials Science, v. 52, n. 4 (Oktober 2016).
- (2017): Fatigue behaviour of strain-hardening cement-based composites (SHCC). In: Cement and Concrete Research, v. 92 (Februar 2017).
- (2019): Interface characteristics of jute fiber systems in a cementitious matrix. In: Cement and Concrete Research, v. 116 (Februar 2019).
- (2022): Macro and meso analysis of cement-based materials subjected to triaxial and uniaxial loading using X-ray microtomography and digital volume correlation. In: Construction and Building Materials, v. 323 (März 2022).
- (2022): Influence of elevated temperatures on the residual and quasi in-situ flexural strength of strain-hardening geopolymer composites (SHGC) reinforced with PVA and PE fibers. In: Construction and Building Materials, v. 314 (Januar 2022).
- (2021): Micro-mechanical model for ultra-high strength and ultra-high ductility cementitious composites (UHS-UHDCC). In: Construction and Building Materials, v. 267 (Januar 2021).
- (2020): Impaktsicherheit von Baukonstruktionen durch mineralisch gebundene Komposite: Materialebene. In: Beton- und Stahlbetonbau, v. 116, n. 1 (November 2020).
- (2020): Impaktsicherheit von Baukonstruktionen durch mineralisch gebundene Komposite: Bauteilebene. In: Beton- und Stahlbetonbau, v. 116, n. 1 (November 2020).
- (2020): Interlaboratory study on rheological properties of cement pastes and reference substances: comparability of measurements performed with different rheometers and measurement geometries. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).
- (2018): Formation of lubricating layer and flow type during pumping of cement-based materials. In: Construction and Building Materials, v. 178 (Juli 2018).
- (2020): Mineral-impregnated carbon fiber composites as novel reinforcement for concrete construction: Material and automation perspectives. In: Automation in Construction, v. 110 (Februar 2020).
- (2019): Large-scale digital concrete construction – CONPrint3D concept for on-site, monolithic 3D-printing. In: Automation in Construction, v. 107 (November 2019).
- (2019): Influence of loading parameters in cyclic tension-compression regime on crack-bridging behaviour of PVA microfibres embedded in cement-based matrix. In: Construction and Building Materials, v. 228 (Dezember 2019).
- (2019): Fatigue behavior of strain‐hardening cement‐based composites—From the single fiber level to real‐scale application. In: Structural Concrete, v. 20, n. 4 (August 2019).
- (2017): Heat treatment of fresh concrete by radio waves – Avoiding delayed ettringite formation. In: Construction and Building Materials, v. 143 (Juli 2017).
- (2013): Influence of short dispersed and short integral glass fibres on the mechanical behaviour of textile-reinforced concrete. In: Materials and Structures, v. 46, n. 4 (April 2013).
- (2018): Integration der Bewehrung beim 3D-Druck mit Beton. In: Beton- und Stahlbetonbau, v. 113, n. 7 (Juli 2018).
- (2015): Hochduktiler Beton mit Kurzfaserbewehrung - Baustoffliche Grundlagen und bautechnische Anwendungen. In: Beton- und Stahlbetonbau, v. 110, n. 1 (Januar 2015).
Structurae kooperiert mit
