Viktor Mechtcherine 
- (2024): Employing limestone and calcined clay for preserving the strain-hardening response of PET fiber-reinforced cementitious composites. In: Construction and Building Materials, v. 438 (August 2024).
- (2024): Experimental and analytical analysis of the bond alteration of impregnated carbon fibre reinforcements embedded in alkali-activated concrete at elevated temperatures. In: Construction and Building Materials, v. 435 (Juli 2024).
- (2024): Effect of nanofibrillated cellulose on shrinkage of cement pastes. In: Materials and Structures, v. 57, n. 4 (12 April 2024).
- (2023): Evolution of capillary pressure in 3D-printed concrete elements: numerical modelling and experimental validation. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Fast‐setting mineral‐impregnated carbon‐fiber (MCF) reinforcements based on geopolymers. In: ce/papers, v. 6, n. 6 (Dezember 2023).
- (2023): Effect of polymeric fiber coating on the mechanical performance, water absorption, and interfacial bond with cement-based matrices. In: Construction and Building Materials, v. 404 (November 2023).
- (2023): Effect of microcrystalline and nano-fibrillated cellulose on the mechanical behavior and microstructure of cement pastes. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2013): Durability design strategies for new cementitious materials. In: Cement and Concrete Research, v. 54 (Dezember 2013).
- (2016): Effect of fiber properties and matrix composition on the tensile behavior of strain-hardening cement-based composites (SHCCs) subject to impact loading. In: Cement and Concrete Research, v. 82 (April 2016).
- (2015): Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars — Development of yield stress and plastic viscosity over time. In: Cement and Concrete Research, v. 67 (Januar 2015).
- (2023): Effect of surface profiling on the mechanical properties and bond behaviour of mineral-impregnated, carbon-fibre (MCF) reinforcement based on geopolymer. In: Construction and Building Materials, v. 367 (Februar 2023).
- (2022): Effect of alkali treatment on physical–chemical properties of sisal fibers and adhesion towards cement-based matrices. In: Construction and Building Materials, v. 345 (August 2022).
- (2022): Experimental modal analysis of RC beams strengthened with SHCC subjected to shear under impact strain rates. In: Engineering Structures, v. 264 (August 2022).
- (2022): Extrusion process simulation and layer shape prediction during 3D-concrete-printing using the Particle Finite Element Method. In: Automation in Construction, v. 136 (April 2022).
- (2021): Digitaler Betonbau durch additive Verfahren – Sachstand und Forschungsbedarf. In: Beton- und Stahlbetonbau, v. 116, n. 11 (September 2021).
- (2012): Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix. In: Cement and Concrete Composites, v. 34, n. 10 (November 2012).
- (2020): Electrical Joule heating of cementitious nanocomposites filled with multi-walled carbon nanotubes: role of filler concentration, water content, and cement age. In: Smart Materials and Structures, v. 29, n. 12 (30 Oktober 2020).
- (2020): The effect of superabsorbent polymers on the mitigation of plastic shrinkage cracking of conventional concrete, results of an inter-laboratory test by RILEM TC 260-RSC. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).
- (2019): Digital Bauen - 3D-Druck mit Beton. Digital Construction - Concrete 3D Printing. In: structure, v. 5, n. 1 ( 2019).
- (2019): Extrusion of cement-based materials - an overview. In: RILEM Technical Letters, v. 3 (April 2019).
- (2020): Dispersion of different carbon-based nanofillers in aqueous suspension by polycarboxylate comb-type copolymers and their influence on the early age properties of cementitious matrices. In: Construction and Building Materials, v. 241 (April 2020).
- (2020): Direct printing test for buildability of 3D-printable concrete considering economic viability. In: Automation in Construction, v. 109 (Januar 2020).
- (2019): Fatigue behavior of strain‐hardening cement‐based composites—From the single fiber level to real‐scale application. In: Structural Concrete, v. 20, n. 4 (August 2019).
- (2019): Effects of layer-interface properties on mechanical performance of concrete elements produced by extrusion-based 3D-printing. In: Construction and Building Materials, v. 205 (April 2019).
- (2015): Effects of dielectric heating of fresh concrete on its microstructure and strength in the hardened state. In: Construction and Building Materials, v. 81 (April 2015).
- (2012): Durability of strain-hardening cement-based composites (SHCC). In: Materials and Structures, v. 45, n. 10 (Oktober 2012).
- (2017): Effect of superabsorbent polymers (SAP) on the freeze–thaw resistance of concrete: results of a RILEM interlaboratory study. In: Materials and Structures, v. 50, n. 1 (Februar 2017).
- (2010): Durability of textile reinforced concrete made with AR glass fibre: effect of the matrix composition. In: Materials and Structures, v. 43, n. 10 (Dezember 2010).
- (2014): Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test. In: Materials and Structures, v. 47, n. 3 (März 2014).
- (2017): Failure Localization and Correlation of High-Speed Tension and Impact Tests of Strain-Hardening Cement-Based Composites. In: Journal of Materials in Civil Engineering (ASCE), v. 29, n. 11 (November 2017).
Structurae kooperiert mit
